Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 768GB (8x96GB) ECC RDIMM CL46 1.1V Supermicro H14SSF memory upgrade

SKU CH-48Q5-NP42W

A 768 GB DDR5 registered ECC kit of eight 96 GB modules at 5600 MHz CL46 and 1.1 V, built to the Supermicro H14SSF motherboard's exact rank, voltage and timing requirements for full-capacity stability

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Zobrazit dalších 24 konfigurací
  • 768 GB total capacity from eight 96 GB modules for dense memory configurations
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the server memory controller voltage requirement
  • 288-pin RDIMM form factor fits the Supermicro H14SSF motherboard exactly

Supermicro H14SSF DDR5 ECC RDIMM Kit

This 768GB kit contains eight 96GB DDR5 5600 Registered ECC RDIMMs built for the Supermicro H14SSF motherboard. The modules run at 1.1V with CL46 latency and a 2Rx4 organisation across 288 pins. Registered buffering and on-die ECC protect data integrity in fully populated server configurations.

Suited For Fully Populated H14SSF Servers

Administrators upgrading a Supermicro H14SSF to its maximum supported capacity with matched 2Rx4 Registered DIMMs will find the exact specification required. Builders needing unbuffered UDIMMs, SODIMMs, lower-density modules, or non-ECC memory should select a different kit because this product does not meet those requirements.

768GB 8x96GB DDR5 5600 CL46 1.1V

The single specification that decides fitment is the complete kit definition: 768GB total capacity delivered as eight 96GB DDR5 5600 RDIMMs at CL46 and 1.1V with 2Rx4 registered ECC. Only systems that accept this exact combination of density, rank, voltage, timing and form factor will recognise the full capacity at rated speed.

Přednosti

  • 768 GB total capacity from eight 96 GB modules for dense memory configurations
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for the platform
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the server memory controller voltage requirement
  • 288-pin RDIMM form factor fits the Supermicro H14SSF motherboard exactly

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I confirm the kit is running at DDR5 5600 CL46 after installation?

Enter the BIOS on the Supermicro H14SSF and verify the memory speed shows 5600 MT/s with CAS latency 46; the registered ECC design ensures each of the eight 96 GB modules is recognised at full capacity.

What comes in the box and do I need anything else to install it?

The package contains the complete 768 GB kit as eight 96 GB DDR5 288-pin RDIMMs; no extra parts are required for installation on the H14SSF motherboard.

Should I choose the 8×96 GB kit or a different capacity for the H14SSF?

Select the 8×96 GB kit when you need the full 768 GB supported by the board; smaller kits use the same DDR5 5600 CL46 1.1 V registered ECC specification but provide less total memory.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.