Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR5 RDIMM modules, bare circuit boards with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 96GB (2x48GB) ECC Registered RDIMM CL46 1.1V 288-Pin Memory Upgrade for GIGABYTE MS34-CP0

SKU CH-AVTP-BAEWW

A 96GB kit of two 48GB DDR5 5600 RDIMMs with ECC and registered buffering at CL46 and 1.1V for the GIGABYTE MS34-CP0 motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

Zobrazit dalších 18 konfigurací
  • 96 GB capacity from two 48 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture corrects single-bit errors and supports full population
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 memory slots precisely

Exact-Match Upgrade for GIGABYTE MS34-CP0

This 96 GB kit (2 x 48 GB) uses DDR5 5600 PC5-44800 modules built to the precise rank, voltage and timing the server's memory controller expects. Registered ECC RDIMMs are recognised at full capacity and run at their rated speed without manual tuning. Builders expanding a compatible GIGABYTE MS34-CP0 platform receive the exact configuration the board's population rules require.

Registered ECC Architecture Benefits

Registered buffering offloads the memory controller so every populated slot operates at full capacity, while ECC detects and corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The 2Rx8 organisation and 1.1 V operation match the motherboard's electrical requirements, enabling stable operation across all supported channels. Systems needing unbuffered UDIMMs or non-ECC memory cannot use this kit.

DDR5 5600 Interface Constraints

The DDR5 5600 standard sets the data rate and timing envelope; this kit operates at CL46 within that specification. Maximum capacity per slot and total system capacity are defined by the motherboard's memory controller and BIOS, not by the modules alone. Buyers must verify their specific platform's supported DIMM population order and maximum configured memory before installation.

Přednosti

  • 96 GB capacity from two 48 GB modules for high-density server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the platform
  • Registered ECC architecture corrects single-bit errors and supports full population
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the GIGABYTE MS34-CP0 memory slots precisely

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the registered ECC RDIMM design require any firmware updates or special configuration to maintain stability over time?

The registered architecture offloads the memory controller so every slot runs fully populated at full capacity, while ECC corrects single-bit errors on the fly to prevent silent data corruption. No firmware updates are mentioned in the specifications.

What limits sustained throughput when the kit runs at DDR5 5600 continuously?

The CL46 latency and 1.1V operating voltage define the timing and power envelope the memory controller expects for continuous operation at the rated 5600 MT/s speed.

How much heat does the kit produce without a heat spreader during all-day operation?

The modules operate at 1.1V with no heat spreader, relying on the server chassis airflow for cooling during continuous registered ECC operation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.