Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Six green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 CL46 288GB (6×48GB) ECC Registered RDIMM memory upgrade for Supermicro H14SHM

SKU CH-ADXD-VNW9P

288 GB DDR5-5600 ECC registered RDIMM kit of six 48 GB modules at CL46 and 1.1 V, validated for the Supermicro H14SHM motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Zobrazit dalších 24 konfigurací
  • 288 GB total capacity from six 48 GB modules enables maximum memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro H14SHM
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 1 V operating voltage matches the platform specification for stable full-population operation
  • Exact-fit 288-pin RDIMM kit validated for the H14SHM motherboard memory population rules

288GB DDR5-5600 ECC RDIMM kit for Supermicro H14SHM

This NEMIX RAM kit supplies 288GB of DDR5 memory in six 48GB Registered ECC RDIMMs. It runs at 5600MHz with a CAS latency of CL46 and a voltage of 1.1V. The modules use a 2Rx8 organisation and are built with major-brand DRAM chips.

Suited for fully populated H14SHM servers needing

The kit matches the Supermicro H14SHM motherboard’s requirement for 288-pin Registered DDR5 DIMMs with ECC. Registered buffering allows all slots to run fully populated at rated speed. It is not for systems that only accept unbuffered UDIMMs or SODIMM modules.

DDR5 5600 CL46 1.1V Registered ECC specification

The memory controller expects DDR5-5600 (PC5-44800) at 1.1V with CL46 timing and a 2Rx8 rank structure. Matching these exact parameters ensures the server recognises the full 288GB and operates at the rated frequency without down-clocking.

Přednosti

  • 288 GB total capacity from six 48 GB modules enables maximum memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the Supermicro H14SHM
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 1 V operating voltage matches the platform specification for stable full-population operation
  • Exact-fit 288-pin RDIMM kit validated for the H14SHM motherboard memory population rules

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What motherboard must I already have for this 288GB DDR5 5600 kit to be recognised at full capacity?

This kit is validated for the Supermicro H14SHM motherboard; the 288-pin Registered RDIMM form factor and 1.10V voltage match that board's memory controller requirements exactly.

Can I mix these 48GB 2Rx8 modules with any existing DDR5 RDIMMs I keep in the H14SHM?

The board's population rules must be followed; all six slots should use identical 2Rx8 Registered ECC modules at 1.1V CL46 so the controller runs every channel at the rated 5600 speed.

How do I confirm the kit is running at DDR5 5600 CL46 with ECC active after installation?

Check the BIOS memory information or a tool such as dmidecode — it should report 288GB total, 5600 MT/s, CL46 timings, 1.1V, Registered ECC and 2Rx8 organisation on every DIMM.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.