Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Six green DDR5 RDIMM modules in a row, bare circuit boards with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 576GB (6×96GB) 4800 CL40 1.1V 2Rx4 ECC RDIMM for Supermicro H14SHM

SKU CH-VT95-RMPT4

A 576 GB DDR5 registered ECC kit of six 96 GB modules running at 4800 MHz CL40 and 1.1 V, validated for the Supermicro H14SHM motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Zobrazit dalších 24 konfigurací
  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5-4800 speed with CL40 latency matches the board's rated memory controller timing
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors in flight
  • 10 V operation at 2Rx4 rank keeps power draw low across all populated slots
  • 288-pin form factor verified for the Supermicro H14SHM motherboard memory population rules

Exact-match 576 GB DDR5 kit for Supermicro H14SHM

This 576 GB kit contains six 96 GB DDR5-4800 registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14SHM memory controller expects. The 2Rx4 organization and 1.10 V operation allow every slot to be populated at full rated speed without manual tuning. It is intended for administrators who need maximum capacity on this specific platform.

Registered buffering and low voltage for stable

Registered architecture offloads the memory controller so all six modules run fully populated at DDR5-4800 while drawing only 1.10 V per DIMM. The lower voltage reduces heat output inside dense server chassis and keeps fan speeds modest under sustained workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption that would otherwise trigger unplanned reboots.

288-pin RDIMM form factor dictates installation

The 288-pin registered DIMM form factor fits only RDIMM slots; it will not work in UDIMM or SODIMM sockets. Population order and maximum supported capacity are defined by the H14SHM manual, so the installer must follow the vendor's approved sequence before seating the modules. No heat spreaders are present, leaving the DRAM exposed for direct airflow from chassis fans. Buyers needing unbuffered memory or a different pin count should look elsewhere.

Přednosti

  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5-4800 speed with CL40 latency matches the board's rated memory controller timing
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors in flight
  • 10 V operation at 2Rx4 rank keeps power draw low across all populated slots
  • 288-pin form factor verified for the Supermicro H14SHM motherboard memory population rules

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the six 96 GB DDR5 RDIMM modules in the Supermicro H14SHM and which population step is often missed?

Follow the motherboard manual for the exact slot order; the common mistake is skipping the prescribed sequence and not seating each 288-pin module until the retention clips click.

What maintenance or replacement will this 576 GB DDR5 ECC RDIMM kit need over its service life?

No scheduled maintenance is required; if a module fails the lifetime replacement warranty covers a swap, otherwise the kit runs without intervention.

What limit appears first when this DDR5 4800 CL40 1.1 V registered memory runs sustained workloads?

The memory controller’s maximum supported capacity and population rules cap usable memory before thermal or voltage limits become a factor.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.