BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278333BTC
Skladem
NEMIX RAM
NEMIX RAM DDR5 6400 96GB 6x16GB CL52 1.1V ECC RDIMM Supermicro H13SRH memory upgrade
A 96 GB DDR5 registered ECC kit of six 16 GB modules running at 6400 MHz with CL52 latency and 1.1 V operation, validated for the Supermicro H13SRH motherboard
- Capacity96GB (6 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB kit fills every slot at rated speed
- DDR5-6400 CL52 1.1 V matches controller timing exactly
- Registered ECC prevents silent data corruption under load
- 6 x 16 GB 1Rx8 modules fit Supermicro H13SRH population rules
- Lifetime replacement warranty with US-based technical support
96GB DDR5-6400 ECC RDIMM kit
This 96GB kit contains six 16GB DDR5 6400MHz PC5-51200 modules in a 288-pin Registered RDIMM form factor. Each module runs at 1.1V with CL52 latency and 1Rx8 rank organisation. The kit is built as an exact-match upgrade for the Supermicro H13SRH motherboard.
Suited for Supermicro H13SRH servers
Registered ECC architecture allows all six slots to run fully populated at rated speed while correcting single-bit errors on the fly. Builders needing unbuffered UDIMM or SODIMM modules, or systems that do not support Registered DDR5 memory, should look elsewhere.
CL52 CAS latency at 1.1V
The memory controller expects CL52 timing at the standard 1.1V DDR5 voltage for stable operation at 6400MHz. Modules with different latency or voltage may not be recognised at full capacity or rated speed.
Přednosti
- 96 GB kit fills every slot at rated speed
- DDR5-6400 CL52 1.1 V matches controller timing exactly
- Registered ECC prevents silent data corruption under load
- 6 x 16 GB 1Rx8 modules fit Supermicro H13SRH population rules
- Lifetime replacement warranty with US-based technical support
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
Does my Supermicro H13SRH motherboard need to support 288-pin DDR5 RDIMM slots for this 96GB kit to work?
Yes, the kit uses 288-pin DDR5 RDIMM modules that must be installed in matching registered DIMM slots on the H13SRH board.
Can I mix these 1Rx8 CL52 1.1V registered ECC modules with older DDR5 RDIMMs that have different ranks or timings?
Mixing ranks, latencies or voltages is not recommended; the memory controller expects identical 1Rx8 CL52 1.1V modules across all populated slots for stable operation.
How do I confirm the system recognises all 96GB at DDR5-6400 with ECC active after installation?
Check the BIOS memory information screen — it should show 96GB total, 6400 MT/s speed, and ECC enabled for each of the six 16GB modules.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
