Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green bare circuit board DDR5 RDIMM memory module with black chips no heat spreader 288 pins

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 96GB 2Rx4 CL52 1.1V 288-pin memory upgrade

SKU CH-KES8-KFBSE

96 GB DDR5-6400 ECC registered DIMM with CL52 timing and 1.1 V operation, validated for the Supermicro X14SDW-40C-SP9F motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 96GB

  • 96GB capacity fills high-density server slots
  • DDR5 6400 speed matches board-rated PC5-51200
  • Registered ECC architecture prevents silent data corruption
  • 2Rx4 1.10V CL52 timing meets controller expectations
  • 288-pin RDIMM form factor fits Supermicro X14SDW-40C-SP9F

96 GB DDR5 ECC RDIMM for Supermicro servers

This 96 GB DDR5 6400 module is built for servers and workstations that require registered ECC memory. The 2Rx4 organisation and 1.1 V operating voltage match the memory controller expectations of the Supermicro X14SDW-40C-SP9F motherboard. It delivers the capacity and error correction needed for production workloads.

Registered design with 288-pin DDR5 form factor

Registered buffering reduces electrical load on the memory controller, allowing full-population stability across every slot. The 288-pin RDIMM layout fits only boards wired for DDR5 registered DIMMs, not UDIMM or SODIMM sockets. No heat spreader is present, so airflow in the chassis handles cooling directly.

CL52 latency at DDR5 6400 (PC5-51200)

The CAS latency of CL52 at the rated 6400 MT/s speed is the timing the motherboard firmware expects for correct training and full-speed operation. Builders who need a different latency or a non-ECC unbuffered module should look elsewhere.

Přednosti

  • 96GB capacity fills high-density server slots
  • DDR5 6400 speed matches board-rated PC5-51200
  • Registered ECC architecture prevents silent data corruption
  • 2Rx4 1.10V CL52 timing meets controller expectations
  • 288-pin RDIMM form factor fits Supermicro X14SDW-40C-SP9F

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What DDR5 speed does this 96GB ECC RDIMM run at?

This module operates at DDR5 6400 (PC5-51200) with a CAS latency of CL52 at 1.10V.

What physical slot and form factor does this 288-pin RDIMM require?

It fits a 288-pin DDR5 RDIMM slot on the Supermicro X14SDW-40C-SP9F motherboard; UDIMM or SODIMM slots will not accept it.

How should I install this 2Rx4 registered ECC kit to avoid population errors?

Follow the motherboard manual for DIMM population order, install the registered ECC module in the approved slot sequence, and verify the BIOS recognises the full 96GB capacity at DDR5 6400.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.