NEMIX RAM
NEMIX RAM DDR5 64GB (4x16GB) 6400MHz CL52 1.1V ECC RDIMM Supermicro H14DSG-O-CPU
64GB DDR5 ECC RDIMM kit of four 16GB modules at 6400MHz CL52 1.1V for Supermicro H14DSG-O-CPU
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 64GB total capacity from four 16GB modules
- DDR5 6400 speed with CL52 latency at 1.1V
- ECC registered RDIMM prevents silent data corruption
- 288-pin form factor matches Supermicro H14DSG-O-CPU requirements
- 1Rx8 rank configuration ensures full population stability
64GB DDR5 ECC RDIMM kit for Supermicro H14DSG-O-CPU
This 64GB kit contains four 16GB DDR5 6400MHz registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-O-CPU motherboard expects. The 288-pin RDIMM form factor matches the board's memory slots so the system recognises the full capacity at its rated speed without manual tuning.
Sustained enterprise workloads
Registered architecture buffers the address and command signals so every slot runs fully populated at 6400MHz while ECC corrects single-bit errors on the fly. The 1.1V operating voltage keeps power draw consistent during long compute runs, preventing the silent data corruption and unplanned reboots that unbuffered memory can allow under continuous load.
288-pin RDIMM modules without heat spreaders
The bare-module design fits tight server DIMM arrays where oversized spreaders would block adjacent slots or airflow. Each 1Rx8 module uses major OEM Samsung, Micron or Hynix ICs selected for the Supermicro platform's population rules. Builders who need a different capacity, rank configuration or UDIMM form factor should verify their motherboard manual before purchase.
Přednosti
- 64GB total capacity from four 16GB modules
- DDR5 6400 speed with CL52 latency at 1.1V
- ECC registered RDIMM prevents silent data corruption
- 288-pin form factor matches Supermicro H14DSG-O-CPU requirements
- 1Rx8 rank configuration ensures full population stability
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
How much heat and power will the 1.1V 6400MHz DDR5 RDIMM kit draw under continuous load?
The modules run at 1.10V, the standard voltage for DDR5-6400, so power draw and heat output match the JEDEC baseline for this speed and capacity.
What motherboard slot and population rules must my Supermicro H14DSG-O-CPU already have for this 4x16GB kit to work?
The board needs four 288-pin DDR5 RDIMM slots and must support 1Rx8 registered ECC modules populated per the manual's approved order for 64GB total capacity.
Will the CL52 1Rx8 registered ECC timing work with older DDR5 modules I keep in the same server?
Mixing different CAS latencies, ranks, or voltages can prevent the memory controller from training at 6400MHz; the manufacturer advises checking the motherboard manual for supported mixed-population configurations.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



