Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular metal power supply unit with side ventilation grille and rear power socket

NShi

NShi D16-180P2A 180W Server Chassis

SKU CH-EZ3T-M1F7M

180W replacement power supply for HP ProDesk SFF and MT desktops with 4+4+7-pin connector

  • Chassis TypeDesktop
  • Direct replacement for HP ProDesk 680, 800 G3 SFF, 480, 600 G4 SFF, 280 and 285 Pro G3 MT
  • 180 W maximum output keeps your system running under load
  • Wide-range 100–240 V AC input works on mains worldwide
  • 4-pin + 4-pin + 7-pin connector matches original HP wiring
  • Tested before shipment so it arrives ready to install

180W PSU for HP ProDesk SFF/MT

This new NShi D16-180P2A power supply unit delivers 180 watts of maximum output power for compatible HP ProDesk small form factor and micro-tower desktops. It serves as a direct replacement for failed or degraded original units in office and commercial environments. The unit accepts a wide AC input range of 100 to 240 volts at 50 to 60 hertz.

4-pin+4-pin+7-pin connector assembly

The specific connector combination of 4-pin, 4-pin and 7-pin plugs matches the motherboard power headers on the listed HP ProDesk models. This exact pin layout ensures correct voltage delivery without adapters or cable modification. Each unit is tested by the supplier before shipment to verify function.

180W maximum output rating

The 180-watt limit determines whether this unit can support the installed processor, graphics card and peripherals in your specific chassis. Systems requiring higher sustained power or additional PCIe power connectors will not operate correctly with this replacement. Verify your original part number against the compatible list before ordering.

Přednosti

  • Direct replacement for HP ProDesk 680, 800 G3 SFF, 480, 600 G4 SFF, 280 and 285 Pro G3 MT
  • 180 W maximum output keeps your system running under load
  • Wide-range 100–240 V AC input works on mains worldwide
  • 4-pin + 4-pin + 7-pin connector matches original HP wiring
  • Tested before shipment so it arrives ready to install

Specifikace

Chassis TypeDesktop

Otázky k tomuto produktu

Will the 4 pin+4 pin+7pin connector need to be replaced after long use?

The connector is a fixed part of the unit; if it wears or fails the whole power supply must be swapped.

What limit appears first when the PSU runs at full 180W output continuously?

The 180W maximum output power is the hard ceiling; sustained loads at that level leave no headroom.

How much heat and noise should I expect with the fan running all day on 100-240V input?

The unit draws up to 2.3A at the AC inlet; fan speed and temperature rise depend on the load placed on the 180W supply.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.