Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

OEM Industries

OEM Industries 1225-12HS HAPW 120mm CPU cooler

SKU CH-2RDR-P6C4F

120 mm square cooling fan with sleeve bearing, 12 V 0.55 A four-wire power connector, non-LED black frame

  • ColorBlack
  • Type1225-12HS
  • Fan Size120mm
  • Bearing TypeSleeve Bearing
  • Power Connector4 Wires
  • LEDNon-LED
  • 120 mm fan fits standard CPU mounts
  • 12 V 0.55 A four-wire PWM control
  • Sleeve bearing for quiet operation
  • Non-LED black frame suits any build
  • 1225-12HS HAPW model verified by part number 400181

Compact 120 mm Air Cooler

The OEM Industries 1225-12HS HAPW is a 120 mm square frame cooler with a 12 V, 0.55 A four-wire PWM fan. It uses a sleeve bearing and has no LED lighting. The unit suits builders who need a standard-height tower cooler for mainstream sockets.

PWM Control Limits

The four-wire connector allows motherboard speed control, but the sleeve bearing is rated for continuous operation rather than high-RPM bursts. Acoustic output will rise with voltage, and the bearing may wear faster under sustained maximum speed. Buyers who need silent operation at low duty cycles should verify the fan curve in BIOS.

Replaces Stock Box Coolers

This cooler replaces basic Intel or AMD stock coolers that use push-pin or clip mounts. The jump is worthwhile when the original cooler throttles under sustained loads or produces excessive noise. It does not address builds requiring high static pressure for dense radiators or dual-fan tower designs.

Přednosti

  • 120 mm fan fits standard CPU mounts
  • 12 V 0.55 A four-wire PWM control
  • Sleeve bearing for quiet operation
  • Non-LED black frame suits any build
  • 1225-12HS HAPW model verified by part number 400181

Specifikace

Model1225-12HS HAPW
ColorBlack
Type1225-12HS
Fan Size120mm
Bearing TypeSleeve Bearing
Power Connector4 Wires
LEDNon-LED

Otázky k tomuto produktu

Should I pick the 12V 0.55A four-wire version or a different voltage variant?

This model is a 12V fan drawing 0.55A with a four-wire connector; choose it if your motherboard header supplies 12V and supports PWM control.

What does the 0.55A current draw mean once the fan is installed in my system?

It indicates the fan will pull up to 0.55 amps from the 12V header, so the motherboard fan header must be rated for at least that much current.

How does the four-wire connector affect speed control in practice?

The fourth wire carries a PWM signal, allowing the motherboard to vary fan speed precisely instead of only adjusting voltage.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.