Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 160 by 38 mm DC blower fan with 3 pin connector

OEM Industries

OEM Industries BFB1612H 160x38mm DC Blower 12V 2.15A 3-Pin CPU cooler

SKU CH-398X-NA1JJ

A 160 by 38 millimetre DC blower with 12 volt 2.15 amp draw and three-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • 12V 2.15A power draw supports strong airflow
  • 160x38mm blower frame moves air through tight channels
  • Ball bearing reduces friction for longer service life
  • 3-pin connector enables speed monitoring on standard headers
  • 120mm impeller diameter fits common mounting patterns

Delta 160x38mm DC Blower

The OEM Industries BFB1612H is a 12 V DC blower measuring 160 by 38 mm with a 120 mm fan diameter. It draws 2.15 A through a three-pin power connector and uses a ball bearing for rotation. The unit is supplied as a fan only in black finish.

Suited for tight 1U or custom ducting

This blower fits builders who need focused airflow through a narrow 160 mm by 38 mm channel and can provide a 12 V, 2.15 A supply on a three-pin header. It is not for systems that require a heatsink assembly, PWM speed control, or a larger frame size.

120 mm fan in 160x38 mm frame

The 120 mm impeller moves air through the 160 by 38 mm housing at the rated 12 V, 2.15 A input. Headroom ends when static pressure exceeds the blower curve or when a four-pin PWM signal is expected for automatic speed regulation.

Přednosti

  • 12V 2.15A power draw supports strong airflow
  • 160x38mm blower frame moves air through tight channels
  • Ball bearing reduces friction for longer service life
  • 3-pin connector enables speed monitoring on standard headers
  • 120mm impeller diameter fits common mounting patterns

Specifikace

ModelBFB1612H
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Otázky k tomuto produktu

What 12 V power header must my motherboard provide for the BFB1612H's 3-pin connector?

A standard 3-pin 12 V fan header capable of supplying at least 2.15 A is required for the blower to start and run at full speed.

Will the 160 mm by 38 mm frame fit in the same mounting holes as my old 120 mm fan?

No, the blower's 160 mm square footprint and 38 mm thickness are larger than a typical 120 mm fan, so new mounting points or a compatible bracket are needed.

How can I confirm the blower is spinning correctly after installation?

Check the BIOS or fan-control software for an RPM reading on the 3-pin header; a steady value above zero shows the ball-bearing motor is running.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.