Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 60mm square maglev cooling fan with two wire connector

OEM Industries

OEM Industries MB60101V3-000C-A99 60mm Maglev Fan

SKU CH-ERBM-R16E8

A 60 mm maglev fan with a 2-pin connector runs on 12 V and draws 0.65 W

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeMaglev
  • Power Connector2 Pin
  • LEDNo
  • Maglev bearing reduces friction for quieter operation
  • 12 V, 0.65 W design keeps power draw low
  • 60 mm frame fits compact CPU coolers
  • Two-pin connector enables simple motherboard hookup
  • Hydraulic bearing construction extends service life

60 mm Maglev CPU Fan

This 60 mm maglev fan is built for compact CPU air coolers in small-form-factor systems. The magnetic levitation bearing reduces friction and noise while maintaining steady airflow. It suits builders who need a low-profile replacement for tight spaces. The two-pin power connector fits standard motherboard headers without adapters.

Maglev Bearing and Two-Pin Design

The maglev bearing eliminates physical contact between moving parts, extending service life and keeping acoustic output low. A black frame blends into most builds and the 10 mm thickness clears narrow heatsink fins. The two-wire lead delivers 12 V power directly from the board, so fan speed follows the motherboard voltage curve. No LED lighting means no extra cables or software control.

Upgrade from Sleeve or Ball Bearing Fans

This unit replaces older sleeve or ball bearing fans that develop rattle or fail after extended use. The jump is worth it when silence and longevity matter more than maximum RPM. Builders who need PWM speed reporting or a three-pin header should look elsewhere, as this model provides only two-wire voltage control.

Přednosti

  • Maglev bearing reduces friction for quieter operation
  • 12 V, 0.65 W design keeps power draw low
  • 60 mm frame fits compact CPU coolers
  • Two-pin connector enables simple motherboard hookup
  • Hydraulic bearing construction extends service life

Specifikace

ModelMB60101V3-000C-A99
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeMaglev
Power Connector2 Pin
LEDNo

Otázky k tomuto produktu

What does the 2-pin power connector limit for the MB60101V3-000C-A99?

The 2-pin connector supplies 12 V power but does not carry a PWM or tachometer signal, so the fan runs at a fixed speed and the motherboard cannot monitor its RPM.

What physical clearance does the 60×60×10 mm frame of this fan require?

The fan needs a 60 mm square mounting area and 10 mm of depth behind the mounting surface, with screw holes spaced for standard 60 mm fan mounts.

How is the MB60101V3-000C-A99 installed, and what step is often missed?

Align the four corner holes, insert screws through the chassis or heatsink into the fan frame, then connect the 2-pin plug to a 12 V header; the step often missed is verifying the connector orientation so the black wire matches the ground pin.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.