Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black square 60mm fan, 25mm thick, two-wire 2-pin connector

OEM Industries

OEM Industries MMF-06G24DH CN1 60mm 24V CPU cooler

SKU CH-KVXH-FEB3R

A 60 mm square fan with 24 V 0.06 A power and dual ball bearings for industrial converter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing Type2 Ball
  • Power Connector2 Pin
  • LEDNo
  • 60 mm fan fits tight industrial enclosures
  • 24 V 0.06 A draw keeps power budgets low
  • Dual ball bearings extend service life in continuous duty
  • Two-pin connector simplifies wiring to YASKAWA or ABB PLCs
  • Melco-built 60×25 mm frame matches OEM mounting patterns

Product Identity

This is a 60 mm square cooling fan from OEM Industries, built to the Melco MMF-06G24DH CN1 specification. It runs on 24 V at 0.06 A and connects through a two-pin header. The unit is intended for industrial inverter cabinets such as YASKAWA PLC and ABB equipment rather than standard desktop CPU sockets.

Upgrade Context

The fan replaces an identical 60*25 mm Melco blower that has worn out or failed in a converter enclosure. The jump is worth it when the original bearing becomes noisy, airflow drops below spec, or the two-pin connector no longer seats securely. It is not a retrofit for larger CPU coolers, PWM-controlled headers, or builds that require 12 V operation.

Build Integration

The black frame measures 60 mm by 25 mm and uses a two-wire, two-pin power connector with no PWM or tachometer signal. A 24 V DC supply capable of at least 0.06 A is required, and the installer must verify pin polarity before powering the unit. The fan frees up no additional space beyond its own footprint and adds no lighting or speed-control features.

Přednosti

  • 60 mm fan fits tight industrial enclosures
  • 24 V 0.06 A draw keeps power budgets low
  • Dual ball bearings extend service life in continuous duty
  • Two-pin connector simplifies wiring to YASKAWA or ABB PLCs
  • Melco-built 60×25 mm frame matches OEM mounting patterns

Specifikace

ModelMMF-06G24DH CN1
ColorBlack
TypeFan only
Fan Size60mm
Bearing Type2 Ball
Power Connector2 Pin
LEDNo

Otázky k tomuto produktu

Will the 60mm square frame with 25mm depth fit my YASKAWA PLC enclosure?

The fan measures 60mm by 60mm and is 25mm thick, so verify your enclosure has that exact square cut-out and depth clearance before ordering.

How do I connect the 2-pin 24V power lead without reversing polarity?

Match the two wires to the 24V supply terminals on the converter board; the connector is keyed only by wire order, so double-check the silkscreen or manual for positive and negative before powering up.

When should I plan to replace the 2-ball bearing fan in continuous PLC duty?

With dual ball bearings the fan is rated for long continuous operation; schedule a replacement when audible noise increases or airflow drops below the level needed to keep the converter within its thermal limits.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.