Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small black 6010 sleeve-bearing fan with three-pin connector

OEM Industries

OEM Industries PLD06010S12L 12V .2A 3-pin VGA fan CPU cooler

SKU CH-2706-EYQGW

A 12 V sleeve-bearing fan with a 3-pin connector for VGA or CPU cooling

  • ColorBlack
  • Bearing TypeSleeve Bearing
  • Power Connector3 Pin
  • LEDNo
  • 12 V operation keeps the fan running steadily
  • 2 A draw limits power consumption
  • sleeve bearing provides quiet rotation
  • three-pin connector enables speed monitoring
  • compact 6010 frame fits tight graphics-card spaces

Compact 12 V sleeve-bearing cooler

This 6010-frame fan mounts on graphics cards or small-form-factor CPU heatsinks that accept a 3-pin header. It draws .2 A at 12 V and uses a sleeve bearing for quiet, low-speed airflow in tight builds.

Check header voltage and mounting holes

Verify that your board or card supplies 12 V on a standard three-pin connector and that the screw pattern matches the 6010 footprint. The fan has no PWM lead, so speed control depends on voltage regulation from the header.

Black sleeve-bearing frame

The black plastic housing and sleeve bearing keep acoustic output low during continuous operation. A permanent three-wire cable connects directly to the header, leaving no extra connectors to route inside cramped enclosures.

Přednosti

  • 12 V operation keeps the fan running steadily
  • 2 A draw limits power consumption
  • sleeve bearing provides quiet rotation
  • three-pin connector enables speed monitoring
  • compact 6010 frame fits tight graphics-card spaces

Specifikace

ModelPLD06010S12L
ColorBlack
Bearing TypeSleeve Bearing
Power Connector3 Pin
LEDNo

Otázky k tomuto produktu

What comes with the Power Logic PLD06010S12L fan and what must I buy separately?

The package contains the 12V .2A sleeve-bearing fan with its 3-pin connector attached. No mounting screws, thermal paste or adapter cables are included, so you will need to source those separately if your graphics card or heatsink does not already have them.

Which version of the PLD06010S12L should I choose for my graphics card cooler?

Only one version is offered: a black 6010-size fan running at 12V .2A with a 3-pin power connector and sleeve bearing. There are no alternative voltage, bearing or colour options to select from.

What does the 12V .2A rating mean once the fan is installed in my card?

It draws .2 amps from a 12V rail, so the motherboard or graphics-card header must supply at least that much current. The 3-pin connector provides power and tachometer signal but not PWM control, so speed will vary with voltage rather than a duty-cycle signal.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.