Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small black 50mm blower fan with two wires

OEM Industries

OEM Industries SHBC0512BH 50mm 12V .17A 2.04W CPU Cooler

SKU CH-96MW-NQCTH

A 50 mm DC brushless blower fan with ball bearing runs on 12 V at 0.17 A and 2.04 W using a 2‑pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeBall
  • LEDNo
  • DC brushless blower runs quietly and reliably
  • 50 mm frame fits tight chassis spaces
  • Ball bearing design extends operational lifespan
  • 12 V .17 A draw keeps power use low
  • Two-wire two-pin connector simplifies installation

Compact 50 mm blower for tight builds

The OEM Industries SHBC0512BH is a 50 mm DC brushless blower designed for small-form-factor systems and industrial enclosures. It suits builders who need directed airflow in confined spaces where a standard axial fan cannot fit. Buyers looking for a large heatsink or multi-fan cooler should look elsewhere.

Check 12 V two-pin header and mounting holes

Verify that your board or controller provides a 12 V two-pin header rated for at least .17 A. Confirm the 50 mm mounting pattern matches the chassis or heatsink holes before ordering. The unit has no PWM lead, so speed control depends on voltage regulation from the source.

Low 2.04 W draw with ball-bearing reliability

At 2.04 W the blower adds minimal load to a 12 V rail and runs quietly in typical low-RPM operation. The ball bearing ensures consistent performance over long duty cycles without sleeve-bearing wear. Expect modest airflow suited to spot cooling rather than high-throughput thermal loads.

Přednosti

  • DC brushless blower runs quietly and reliably
  • 50 mm frame fits tight chassis spaces
  • Ball bearing design extends operational lifespan
  • 12 V .17 A draw keeps power use low
  • Two-wire two-pin connector simplifies installation

Specifikace

ModelSHBC0512BH
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeBall
LEDNo

Otázky k tomuto produktu

Does the 50 mm blower ship with mounting hardware or only the 2-pin fan unit?

The listing shows a fan-only cooler with 2-wire 2-pin connector; no brackets, screws or thermal paste are mentioned.

The spec lists SHBC0512BH at 12 V and 0.17 A — is there a higher-airflow variant in the same 50 mm frame?

Only the SHBC0512BH model appears in the data; no alternative speed or airflow versions are referenced.

What does the 2.04 W power draw mean for cooling capacity in a typical build?

At 2.04 W the blower delivers modest airflow suited to low-TDP CPUs or auxiliary spot cooling, not high-heat loads.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.