Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR3 UDIMM modules with gold contacts and black chips

OWC

OWC 16GB (2x8GB) DDR3 1600 PC3-12800 CL11 2Rx8 240-pin 1.5V Non-ECC UDIMM Kit AS7009RD AS7012RD

SKU CH-A0S1-2YN2J

16 GB DDR3-1600 dual-channel kit for ASUSTOR AS7009RD and AS7012RD NAS upgrades

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo

Capacity 16GB (2 x 8GB)

  • 16 GB kit doubles capacity for demanding workloads
  • DDR3 1600 speed with CL11 latency keeps data flowing
  • 5 V JEDEC-standard voltage ensures broad compatibility
  • 240-pin UDIMM form factor fits ASUSTOR AS7009RD and AS7012RD
  • Non-ECC unbuffered design simplifies installation and stability

ASUSTOR NAS memory upgrade kit

This OWC kit supplies 16 GB of DDR3 memory as two 8 GB unbuffered UDIMMs rated at 1600 MT/s with CL11 latency and 1.5 V operation. It is built to JEDEC and RoHS standards and validated for the ASUSTOR AS7009RD and AS7012RD network-attached storage models. The modules are non-ECC and use a 240-pin desktop form factor.

Check your NAS model and slot count

Verify that your unit is an ASUSTOR AS7009RD or AS7012RD before ordering, as compatibility is limited to those systems. Confirm how many DIMM slots your chassis provides and whether any are already populated, because the kit occupies two slots. Ensure the existing memory, if any, matches the DDR3 1600 specification so the system can run in dual-channel mode.

Thermals noise and power in normal use

The modules run at the standard 1.5 V JEDEC voltage and have no heat spreader, relying on the NAS chassis airflow for cooling. Under typical file-serving workloads the power draw stays low and the sticks add no audible noise. Operating temperatures remain within normal DDR3 limits when the system fans are functioning as designed.

Přednosti

  • 16 GB kit doubles capacity for demanding workloads
  • DDR3 1600 speed with CL11 latency keeps data flowing
  • 5 V JEDEC-standard voltage ensures broad compatibility
  • 240-pin UDIMM form factor fits ASUSTOR AS7009RD and AS7012RD
  • Non-ECC unbuffered design simplifies installation and stability

Specifikace

BrandOWC
Part Number1U6D32R8016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemASUSTOR AS7009RD
ASUSTOR AS7012RD

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What comes in the OWC 16GB DDR3 1600 kit and do I need anything else?

The kit includes two 8GB 240-pin DDR3 1600 CL11 1.5V non-ECC UDIMM modules. No extra parts are required for installation in a compatible ASUSTOR AS7009RD or AS7012RD system.

Should I choose this 16GB (2x8GB) DDR3 1600 CL11 kit or a different capacity for my ASUSTOR NAS?

This 16GB kit provides two matched 8GB modules running at DDR3 1600 CL11 1.5V. Select it when your ASUSTOR AS7009RD or AS7012RD supports 16GB total and you want a balanced dual-channel pair.

What does the PC3-12800 1600MHz CL11 rating mean once the memory is installed in my ASUSTOR?

PC3-12800 indicates a peak transfer rate of 12,800 MB/s at 1600MHz with CL11 latency. In your ASUSTOR AS7009RD or AS7012RD this translates to faster data access for multitasking and large-file workloads.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.