Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips and gold edge connector

OWC

OWC 16GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM HP Workstation Z800 memory upgrade

SKU CH-WVCH-VMJFS

Adds 16 GB of registered ECC DDR3 memory at 1333 MHz for the HP Z800 workstation

  • Capacity16GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB

  • ECC registered design protects data integrity in HP Z800 workstations
  • 16 GB single module expands capacity for demanding workloads
  • DDR3 1333 PC3-10600 CL9 matches factory specifications exactly
  • 5 V JEDEC standard voltage ensures stable operation
  • 240-pin RDIMM form factor installs directly into Z800 slots

Targeted Workstation Upgrade

This 16GB DDR3 ECC Registered RDIMM is built specifically for the HP Workstation Z800. It operates at 1333 MHz with CL9 latency and 1.5V power. The module uses a 2Rx4 rank configuration and a 240-pin form factor. It is designed for server and workstation environments that require error-correcting registered memory.

Compliance And Reliability Focus

The module meets JEDEC and ROHS standards for a warranty-safe installation. OWC tests every unit in-house to ensure it meets or exceeds OEM specifications. The design prevents mixing with unbuffered memory, protecting system stability. This single 16GB stick allows precise capacity scaling for supported configurations.

Platform And Population Checks

Verify that your Z800 workstation supports DDR3 1333 Registered ECC DIMMs before ordering. This memory will not function in standard desktop computers or alongside unbuffered modules. Confirm available 240-pin slots and maximum supported capacity per channel. Matching capacity, speed, and manufacturer across all populated slots is recommended for optimal performance.

Přednosti

  • ECC registered design protects data integrity in HP Z800 workstations
  • 16 GB single module expands capacity for demanding workloads
  • DDR3 1333 PC3-10600 CL9 matches factory specifications exactly
  • 5 V JEDEC standard voltage ensures stable operation
  • 240-pin RDIMM form factor installs directly into Z800 slots

Specifikace

BrandOWC
Part Number1R3D32R416GB
Capacity16GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemHP Workstation Z800

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will this 16 GB DDR3 1333 RDIMM need replacement during the life of my HP Z800?

This module is a solid-state component with no moving parts and no scheduled replacement interval; it only needs to be swapped if a memory test reports a hard error on the 16 GB DIMM.

What is the first limit I will hit when running this ECC Registered memory continuously in the Z800?

The DDR3 1333 bus and CL9 latency set the sustained bandwidth ceiling; the memory controller will throttle before the 1.5 V supply or the 2Rx4 organisation becomes a bottleneck.

How much heat and noise does this 240-pin RDIMM add when the workstation runs all day?

The module has no heat spreader and draws 1.5 V at DDR3 1333 speeds, so it contributes minimal thermal load and zero acoustic noise; system fans will dominate both metrics.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.