Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black memory chips, gold edge connector, no heat spreader

OWC

OWC 16GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM for HP Z1 G5 G4 (Core X) G4 Tower

SKU CH-XZJY-JVH06

16 GB DDR4 2666 MHz CL19 UDIMM for HP Z1 G5, G4 Core X and G4 Tower workstations

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 16 GB DDR4 2666 MHz CL19 boosts HP Z1 responsiveness
  • 2 V JEDEC standard module keeps power draw low
  • 288-pin unbuffered UDIMM fits G5, G4 Core X and G4 Tower
  • Backward compatible with 2133 MHz and 2400 MHz systems
  • 100 % JEDEC and RoHS compliant for warranty-safe upgrade

HP Z1 Workstation Memory Upgrade

This 16GB DDR4 UDIMM is built for HP Z1 Workstation G5, G4 Core X and G4 Tower models. It targets professionals who need more capacity for multitasking and larger datasets in these specific all-in-one and tower systems.

288-Pin Non-ECC Unbuffered DDR4 2666MHz CL19

The module runs at 2666MHz with PC4-21300 rating and CL19 latency at 1.2V. It is a 2Rx8 dual-rank stick without a heat spreader. JEDEC compliance and backward compatibility with 2133MHz and 2400MHz ensure it will negotiate the correct speed automatically.

Fits Standard UDIMM Slots in Supported Z1 Chassis

Installation uses the existing 288-pin DIMM sockets on the system board. No extra power cables, adapters or BIOS updates are required beyond the standard memory configuration rules for the listed workstations. The upgrade frees the CPU from excessive paging when multiple applications or large files are open.

Přednosti

  • 16 GB DDR4 2666 MHz CL19 boosts HP Z1 responsiveness
  • 2 V JEDEC standard module keeps power draw low
  • 288-pin unbuffered UDIMM fits G5, G4 Core X and G4 Tower
  • Backward compatible with 2133 MHz and 2400 MHz systems
  • 100 % JEDEC and RoHS compliant for warranty-safe upgrade

Specifikace

BrandOWC
Part Number2U6D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP Z1 Workstation G5
HP Z1 Workstation G4 (Core X)
HP Z1 Workstation G4 Tower

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How does the 2666MHz speed behave once installed in my HP Z1 workstation?

The module runs at 2666MHz CL19 when the system supports that speed; if the platform only supports 2133MHz or 2400MHz it will downclock automatically to match.

What does the PC4-21300 rating mean for real-world bandwidth limits?

PC4-21300 is the JEDEC designation for DDR4-2666; the workstation's memory controller and channel configuration determine the actual throughput you observe.

Will this 288-pin UDIMM fit the memory slots in an HP Z1 G5, G4 Core X or G4 Tower?

Yes, the 288-pin unbuffered DIMM form factor matches the slots used in those HP Z1 workstation models.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.