Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR3 ECC registered DIMMs with gold contacts

OWC

OWC 1R3D32R4032P 32GB (2x16GB) DDR3 1333 ECC RDIMM memory upgrade

SKU CH-5HNM-56YBD

32 GB DDR3 1333 ECC registered RDIMM kit (2×16 GB) for Supermicro SuperWorkstation 7036A and 7046A systems

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in workstations and servers
  • 32 GB kit (2 × 16 GB) expands memory capacity for demanding workloads
  • DDR3 1333 PC3-10600 CL9 matches Supermicro 7036A and 7046A specifications
  • 240-pin 1.5 V registered DIMMs install directly in compatible Supermicro SuperWorkstation systems
  • Two-rank 2Rx4 organisation optimises signal stability for registered memory architectures

Targeted Server Upgrade

This kit provides 32 GB of DDR3 ECC registered memory in a matched pair of 16 GB modules. It is built for Supermicro SuperWorkstation 7036A and 7046A systems that require registered DIMMs.

Registered ECC Difference

The modules operate at 1333 MHz with CL9 latency and 1.5 V. Registered buffering and ECC correction maintain data integrity in multi-socket workstations and prevent mixing with unbuffered desktop memory.

Workstation And Server Builders

Suited for administrators extending the life of compatible Supermicro platforms or assembling replacement nodes. Not for standard desktop PCs, laptops or any system that accepts only unbuffered non-ECC DIMMs.

Přednosti

  • ECC registered design protects data integrity in workstations and servers
  • 32 GB kit (2 × 16 GB) expands memory capacity for demanding workloads
  • DDR3 1333 PC3-10600 CL9 matches Supermicro 7036A and 7046A specifications
  • 240-pin 1.5 V registered DIMMs install directly in compatible Supermicro SuperWorkstation systems
  • Two-rank 2Rx4 organisation optimises signal stability for registered memory architectures

Specifikace

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperWorkstation 7036A Series
Supermicro SuperWorkstation 7046A Series

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 240-pin DDR3 RDIMMs need any periodic replacement or maintenance after installation?

No, DDR3 ECC registered modules have no moving parts or serviceable components; once seated they run for the life of the system unless a rare defect appears.

What limit appears first when the 32 GB kit runs at 1333 MHz under continuous load?

The memory controller’s maximum supported capacity and rank population rules for the Supermicro 7036A or 7046A workstation will cap usable slots before bandwidth saturates.

How much heat and power do the 1.5 V 2Rx4 modules produce during all-day operation?

Each 16 GB stick draws standard DDR3 1.5 V power and emits typical registered-DIMM heat; no spreader is fitted, so case airflow handles cooling.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.