Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR5 RDIMM modules in a row

OWC

OWC 1TB (8x128GB) DDR5 4800 CL40 ECC Registered RDIMM memory upgrade

SKU CH-M5W9-QFTDR

Eight-module kit adds 1TB of DDR5 4800 ECC registered memory to Dell PowerEdge HS5610 and HS5620 servers

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCYes

Capacity 1TB (8 x 128GB)

  • 1TB total capacity across 8 modules of 128GB each
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered design protects data integrity in critical systems
  • 1V operation meets JEDEC standard for power efficiency
  • Validated for Dell PowerEdge HS5610 and HS5620 servers

1TB DDR5-4800 ECC kit for Dell PowerEdge

This 1TB kit contains eight 128GB DDR5-4800 registered ECC RDIMMs built for Dell PowerEdge HS5610 and HS5620 servers. Each module runs at 1.1V with CL40 latency and a 4Rx4 organisation. The 288-pin registered design adds a buffer that stabilises heavy memory loads in multi-socket systems.

Suited for HS5610 and HS5620 memory expansion

IT teams upgrading compatible Dell PowerEdge servers to 1TB of DDR5 ECC capacity will use this kit. It is not for standard desktop PCs or workstations that accept only unbuffered non-ECC memory, and it cannot be mixed with load-reduced DIMMs in the same chassis.

Registered ECC RDIMM form factor decides fit

The 288-pin registered ECC RDIMM form factor is the single specification that determines whether this kit fits your system. Only platforms designed for DDR5 registered ECC modules with matching voltage and rank configuration will accept it.

Přednosti

  • 1TB total capacity across 8 modules of 128GB each
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered design protects data integrity in critical systems
  • 1V operation meets JEDEC standard for power efficiency
  • Validated for Dell PowerEdge HS5610 and HS5620 servers

Specifikace

BrandOWC
Part Number4R8D54R41TBK
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge HS5610
Dell PowerEdge HS5620

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I buy the 8-module 1 TB kit or add single 128 GB modules?

The kit supplies eight matched 128 GB modules for a total of 1 TB; using the full kit ensures identical rank, timing and voltage across all slots.

What does the DDR5 4800 CL40 rating deliver in a Dell PowerEdge HS5610 or HS5620?

The modules run at 4800 MT/s with a CAS latency of 40 cycles, giving the server the rated JEDEC standard bandwidth for DDR5-4800.

How does the 288-pin RDIMM interface and registered ECC design affect compatibility?

The 288-pin registered ECC RDIMM format is required by the PowerEdge HS5610 and HS5620 and cannot be mixed with unbuffered or load-reduced memory.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.