Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black memory chips and gold edge connectors

OWC

OWC 2R9D42R432GB 32GB DDR4 2933MHz CL21 1.2V 288pin ECC Registered RDIMM memory upgrade

SKU CH-F0RV-FZ4NA

32 GB DDR4 ECC registered RDIMM running at 2933 MHz CL21 for compatible Supermicro X11 server boards

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 32GB

  • 32GB capacity supports demanding server workloads
  • DDR4 2933MHz speed with CL21 latency delivers responsive performance
  • ECC registered design protects data integrity in critical applications
  • 2V operation reduces power consumption and heat
  • Validated for Supermicro X11SPi-TF X11SPL-F X11SPM-F X11SPM-TF X11SPM-TPF motherboards

Server memory upgrade

This 32GB DDR4 2933MHz CL21 registered ECC RDIMM is built for Supermicro X11SP series motherboards. It runs at 1.2V with a 2Rx4 rank configuration and includes no heat spreader.

Workstation and server builds

Suits administrators expanding Supermicro X11SPi-TF, X11SPL-F, X11SPM-F, X11SPM-TF or X11SPM-TPF platforms. Not for standard desktop PCs and cannot be mixed with unbuffered memory modules.

Build integration

Fits 288-pin DDR4 slots and operates at 2933MHz with backward compatibility to 2133MHz, 2400MHz and 2666MHz speeds. Frees DIMM slots by delivering 32GB in a single registered module.

Přednosti

  • 32GB capacity supports demanding server workloads
  • DDR4 2933MHz speed with CL21 latency delivers responsive performance
  • ECC registered design protects data integrity in critical applications
  • 2V operation reduces power consumption and heat
  • Validated for Supermicro X11SPi-TF X11SPL-F X11SPM-F X11SPM-TF X11SPM-TPF motherboards

Specifikace

BrandOWC
Part Number2R9D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SPi-TF
Supermicro Motherboard X11SPL-F
Supermicro Motherboard X11SPM-F
Supermicro Motherboard X11SPM-TF
Supermicro Motherboard X11SPM-TPF

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Which motherboard must I already have to install this 288-pin DDR4 2933MHz ECC RDIMM?

It is validated for Supermicro X11SPi-TF, X11SPL-F, X11SPM-F, X11SPM-TF and X11SPM-TPF motherboards.

Can I keep my existing 2133MHz, 2400MHz or 2666MHz DDR4 modules and add this 32GB CL21 kit?

Yes, the module is backward compatible with those speeds, but all installed DIMMs must be ECC registered; mixing with unbuffered memory is not supported.

How do I confirm the 32GB module is running at 2933MHz with ECC active after installation?

Check the BIOS memory information or run a hardware utility such as dmidecode; it should report 2933MHz, CL21, 1.2V and ECC registered status.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.