Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black memory chips in a 288-pin DDR4 RDIMM form factor

OWC

OWC 2R9D42R464GB 64GB DDR4 2933MHz ECC Registered RDIMM memory upgrade

SKU CH-KHWA-8B3A3

64GB DDR4 2933MHz ECC registered RDIMM for Supermicro X11DPG-SN, X11DPH-I, X11DPH-T, X11DPH-Tq and X11DPi-N motherboards

  • Capacity64GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 64GB

  • ECC registered design protects data integrity in servers
  • 64GB capacity expands memory for demanding workloads
  • 2933MHz DDR4 speed with CL21 latency
  • 2V operation reduces power consumption
  • Compatible with Supermicro X11DPG-SN, X11DPH-I, X11DPH-T, X11DPH-Tq, X11DPi-N

Product Identity

This OWC 64GB DDR4 2933MHz ECC Registered RDIMM is a server-grade memory upgrade built for specific Supermicro motherboards. It delivers 64GB of capacity in a single 288-pin module operating at 1.2V with CL21 latency. The part is validated for X11DPG-SN, X11DPH-I, X11DPH-T, X11DPH-Tq and X11DPi-N platforms.

Suitable Buyers

This module suits administrators expanding Supermicro X11 dual-socket servers that require registered ECC DDR4 memory. It is not for desktop PCs, workstations using unbuffered DIMMs, or any system that cannot accept registered modules. Mixing with unbuffered memory will prevent boot. Buyers needing unbuffered ECC or non-ECC DDR4 should look elsewhere.

Deciding Specification

The registered ECC RDIMM form factor is the single specification that decides compatibility. Only motherboards designed for registered DDR4 DIMMs can use this module; standard desktop boards and unbuffered-only workstations will not accept it.

Přednosti

  • ECC registered design protects data integrity in servers
  • 64GB capacity expands memory for demanding workloads
  • 2933MHz DDR4 speed with CL21 latency
  • 2V operation reduces power consumption
  • Compatible with Supermicro X11DPG-SN, X11DPH-I, X11DPH-T, X11DPH-Tq, X11DPi-N

Specifikace

BrandOWC
Part Number2R9D42R464GB
Capacity64GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DPG-SN
Supermicro Motherboard X11DPH-I
Supermicro Motherboard X11DPH-T
Supermicro Motherboard X11DPH-Tq
Supermicro Motherboard X11DPi-N

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Which motherboards must I already have for this 288-pin DDR4 2933MHz ECC registered RDIMM to work?

This module is validated for Supermicro X11DPG-SN, X11DPH-I, X11DPH-T, X11DPH-Tq and X11DPi-N motherboards.

Can I keep my existing 2133MHz, 2400MHz or 2666MHz DDR4 ECC registered DIMMs and add this 2933MHz CL21 kit alongside them?

The module is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, but all installed DIMMs must be ECC registered; mixing with unbuffered memory is not supported.

How do I confirm the 64GB 2Rx4 module is running at 2933MHz with ECC active after installation?

Check the BIOS memory information or use a tool such as dmidecode to verify speed shows 2933MHz, type shows DDR4 ECC registered, and total capacity reflects the added 64GB.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.