Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with gold contacts and black memory chips

OWC

OWC 2U1D41R804GB 4GB DDR4 2133MHz CL15 1.2V 288pin UDIMM memory upgrade

SKU CH-3QQ3-VPCFX

4GB DDR4 2133MHz CL15 UDIMM upgrade for HP Envy Phoenix 860 series desktops

  • Capacity4GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts system responsiveness with 4GB DDR4 2133MHz CL15 module
  • Low 1.2V operation cuts power draw and heat
  • Guaranteed fit for HP ENVY Phoenix 860-080nz 860-081no 860-082no 860-084no 860-090nz
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Simple DIY install with 288-pin unbuffered UDIMM form factor

System-specific DDR4 for HP Envy Phoenix

This 4 GB DDR4 UDIMM is built for HP Envy Phoenix desktops 860-080nz, 860-081no, 860-082no, 860-084no and 860-090nz. It slots straight into the 288-pin DIMM sockets on those platforms. Owners of other HP models or custom builds should verify compatibility before purchase.

4 GB module at DDR4-2133 CL15

The stick runs at 2133 MHz with a CAS latency of 15 and a 1.2 V operating voltage. A single rank 1Rx8 organisation keeps the electrical load light. Four gigabytes adds usable headroom for everyday multitasking, but memory-intensive workloads such as video editing or virtual machines will still hit capacity limits quickly.

JEDEC-compliant, no heat spreader

The module meets JEDEC standard specifications and is RoHS compliant, making it a warranty-safe upgrade for the listed systems. No heat spreader is fitted, so airflow in the chassis handles cooling directly. OWC supplies a limited lifetime warranty and free technical support, though those terms belong to the manufacturer rather than this listing.

Přednosti

  • Boosts system responsiveness with 4GB DDR4 2133MHz CL15 module
  • Low 1.2V operation cuts power draw and heat
  • Guaranteed fit for HP ENVY Phoenix 860-080nz 860-081no 860-082no 860-084no 860-090nz
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Simple DIY install with 288-pin unbuffered UDIMM form factor

Specifikace

BrandOWC
Part Number2U1D41R804GB
Capacity4GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-080nz
HP ENVY Phoenix 860-081no
HP ENVY Phoenix 860-082no
HP ENVY Phoenix 860-084no
HP ENVY Phoenix 860-090nz

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will this DDR4 2133MHz CL15 module run with the existing memory in my HP ENVY Phoenix 860-080nz?

Yes, it is a 1.2V non-ECC UDIMM built to JEDEC DDR4 2133MHz CL15 specs, so it will operate alongside the factory-installed DIMMs in the 860-080nz and the 860-081no, 860-082no, 860-084no and 860-090nz models.

How can I confirm the module is running at PC4-17000 2133MHz after installation?

Open Task Manager or a tool like CPU-Z and check the memory tab; it should report 2133MHz speed, CL15 latency and 1.2V voltage for the new 288-pin DIMM.

What comes in the box with the OWC 2U1D41R804GB 4GB kit and do I need anything else?

The package contains the single 4GB 288-pin DDR4 UDIMM only; no heat spreader, cables or tools are included, and no extra parts are required for installation in the compatible HP ENVY Phoenix desktops.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.