Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular memory module with gold edge contacts and black chips on both sides

OWC

OWC 2U6D42R816GB 16GB DDR4 2666 CL19 1.2V 288-Pin UDIMM Alienware Aurora R7 R8 R9

SKU CH-MSEJ-NCXG2

A 16GB DDR4 2666MHz CL19 UDIMM module built for Alienware Aurora R7, R8 and R9 desktops

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCNo
  • 16GB DDR4 2666MHz CL19 boosts system responsiveness
  • 2V low-voltage design reduces power draw and heat
  • 288-pin UDIMM form factor fits Alienware Aurora R7 R8 R9
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Backward compatible with 2133MHz and 2400MHz systems

16GB DDR4 for Alienware Aurora R7 R8 R9

This 16GB DDR4 2666 CL19 UDIMM is built for Alienware Aurora R7, R8 and R9 desktops. It suits owners who want a straightforward capacity increase without changing voltage or timings. The module runs at the standard 1.2V and follows JEDEC specifications for broad compatibility. It is a direct-fit upgrade for those specific chassis.

Fits Aurora R7 R8 R9 memory slots

The 288-pin unbuffered non-ECC stick drops into the existing DIMM slots on the supported Aurora models. No heat spreader means it clears standard CPU coolers and tight internal layouts. Backward compatibility with 2133MHz and 2400MHz systems lets the module run at the highest common speed the platform allows. One module adds 16GB without occupying extra bays or cables.

Replaces slower or smaller DDR4 kits

Swapping out 8GB or lower-capacity DDR4 sticks for this 16GB module doubles per-slot capacity and can raise the memory clock from 2133MHz or 2400MHz to 2666MHz. The jump is worth it when multitasking, editing large files or running virtual machines that exceed the current memory ceiling. Builders who need ECC, registered DIMMs or speeds above 2666MHz should look elsewhere.

Přednosti

  • 16GB DDR4 2666MHz CL19 boosts system responsiveness
  • 2V low-voltage design reduces power draw and heat
  • 288-pin UDIMM form factor fits Alienware Aurora R7 R8 R9
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Backward compatible with 2133MHz and 2400MHz systems

Specifikace

BrandOWC
Part Number2U6D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemAlienware Aurora R7
Alienware Aurora R8
Alienware Aurora R9

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the CL19 latency limit throughput when the module runs at 2666 MHz all day?

CL19 is the rated CAS latency for 2666 MHz operation; the module meets JEDEC timings at that speed so sustained throughput follows the standard specification.

How much heat does the 1.2 V unbuffered DIMM produce during continuous use?

At 1.2 V the DDR4 UDIMM runs at standard JEDEC voltage without a heat spreader, so thermal output stays within normal desktop memory limits for all-day workloads.

Which Alienware Aurora chassis must I already own for this 288-pin kit to fit?

The 288-pin DDR4 UDIMM is validated for Alienware Aurora R7, R8 and R9; one of those systems is required for guaranteed compatibility.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.