Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR3 ECC registered DIMMs in anti-static tray

OWC

OWC 32GB (4x8GB) DDR3 1333 ECC Reg RDIMM 1R3D32R4032S

SKU CH-KAF4-QTQ40

32 GB kit of four 8 GB DDR3-1333 ECC registered DIMMs for Supermicro SuperServer 1026, 2026 and 6016 series

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands memory capacity for virtualization
  • DDR3 1333 MHz CL9 matches Supermicro SuperServer specifications
  • 5 V 240-pin RDIMM fits 1026GT, 1026T, 1026TT, 2026TT, 6016GT systems
  • Replaces Supermicro MEMDR380 part numbers for drop-in upgrades

Server ECC RDIMM kit

This OWC kit supplies 32GB of DDR3 ECC registered memory across four 8GB modules. It is built for Supermicro SuperServer 1026GT, 1026T, 1026TT, 2026TT and 6016GT systems that require registered DIMMs. The modules will not work in standard desktop computers or alongside unbuffered memory.

Registered ECC requirement

The single specification that decides compatibility is the registered ECC design. Only platforms that explicitly support 240-pin DDR3 registered ECC DIMMs can use this kit. Mixing these modules with unbuffered memory or installing them in a non-ECC board will prevent the system from booting.

32GB capacity headroom

The 32GB total capacity handles typical server workloads such as virtualisation, database caching and multi-user file services. It runs out when applications demand more memory than the four installed modules provide or when the platform's maximum supported memory per channel is reached.

Přednosti

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands memory capacity for virtualization
  • DDR3 1333 MHz CL9 matches Supermicro SuperServer specifications
  • 5 V 240-pin RDIMM fits 1026GT, 1026T, 1026TT, 2026TT, 6016GT systems
  • Replaces Supermicro MEMDR380 part numbers for drop-in upgrades

Specifikace

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 1026GT Series
Supermicro SuperServer 1026T Series
Supermicro SuperServer 1026TT Series
Supermicro SuperServer 2026TT Series
Supermicro SuperServer 6016GT Series

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does the 1333 MHz speed mean once the modules are installed in a Supermicro SuperServer?

The modules run at DDR3 1333 (PC3-10600) with CL9 latency, delivering the rated throughput when the server's memory controller operates at that frequency.

How does the 240-pin registered ECC interface affect what the memory can do in practice?

The 240-pin registered ECC design adds a register between the DRAM and the memory controller, enabling error correction and the 2Rx4 organisation required by the listed Supermicro SuperServer models.

What physical slot and voltage do the 4x8 GB sticks need to fit the compatible Supermicro systems?

Each 8 GB stick uses a standard 240-pin DDR3 DIMM slot and operates at 1.5 V, matching the Supermicro SuperServer 1026, 2026 and 6016 series requirements.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.