Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, gold edge connector, no heat spreader

OWC

OWC 32GB DDR4 2933MHz PC4-23400 CL21 1.2V 288pin ECC Registered RDIMM memory upgrade

SKU CH-H3MP-96K9K

32 GB DDR4 ECC registered DIMM running at 2933 MHz CL21 for Supermicro X11 server motherboards

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 32GB

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 32 GB capacity expands memory headroom for virtualisation and databases
  • 2933 MHz DDR4 speed with CL21 latency delivers responsive throughput
  • Validated for Supermicro X11DPT-L, X11DPT-PS, X11DPU, X11DPX-T and X11DSC+ motherboards

Server ECC Registered RDIMM

This 32 GB DDR4 module runs at 2933 MHz with CL21 latency and 1.2 V operation. It is built for workstations, servers and NAS systems that require registered ECC memory. The 2Rx4 dual-rank organisation and 288-pin form factor match the listed Supermicro X11 motherboards.

Registered ECC cannot mix with unbuffered

Registered DIMMs use a buffer that adds one clock cycle and changes the electrical load on the memory bus. Motherboards designed for unbuffered memory will not initialise these modules. Backward compatibility covers 2133, 2400 and 2666 MHz speeds, but the registered signalling remains mandatory.

Verify motherboard supports registered ECC

Check that your Supermicro board is one of the X11DPT-L, X11DPT-PS, X11DPU, X11DPX-T or X11DSC+ models. Confirm the BIOS is current and that no unbuffered DIMMs are already installed. This product is not suitable for standard desktop computers.

Přednosti

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity for dense server configurations
  • 32 GB capacity expands memory headroom for virtualisation and databases
  • 2933 MHz DDR4 speed with CL21 latency delivers responsive throughput
  • Validated for Supermicro X11DPT-L, X11DPT-PS, X11DPU, X11DPX-T and X11DSC+ motherboards

Specifikace

BrandOWC
Part Number2R9D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DPT-L
Supermicro Motherboard X11DPT-PS
Supermicro Motherboard X11DPU
Supermicro Motherboard X11DPX-T
Supermicro Motherboard X11DSC+

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I pick the 32GB module or a different capacity for my Supermicro X11DPT-L?

This listing is for a single 32GB module; choose the quantity that matches the total memory your board supports and the number of free slots you have.

What does the 2933MHz rating deliver once installed in a server?

The module runs at 2933MHz CL21 at 1.2V, providing 23400 MB/s peak bandwidth per stick; the system will clock it down automatically if the CPU or chipset only supports lower speeds.

How does the DDR4 ECC Registered interface limit real-world use?

The 288-pin DDR4 ECC Registered form factor only fits server and workstation boards — it will not work in standard desktop motherboards and cannot be mixed with unbuffered DIMMs.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.