Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 19 inch industrial all-in-one PC with resistive touchscreen

partaker

Partaker A11 19" industrial all-in-one PC Core i5 6th Gen 2.0GHz 8GB DDR3 256GB SSD

SKU CH-ARMQ-10Z7Y

19-inch IP65-protected industrial panel PC with resistive touchscreen, Intel Core i5 6th Gen at 2.0GHz, 8GB DDR3, and 256GB SSD

  • Form FactorAll-in-One
  • ColorSilver
  • Operating SystemWindows 10 Pro
  • CPU TypeIntel Core i5 6th Gen
  • CPU Name2.00GHz
  • GPU/VGA TypeIntel Iris Graphics 540

GPU Intel Iris Graphics 540

Memory 8GB DDR3

  • 4GB DDR3
  • 8GB DDR3

SSD 256GB

HDD None

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • IP65 front panel resists dust and water ingress
  • Fanless aluminium chassis runs silently in noise-sensitive areas
  • 5-wire resistive touchscreen works with gloves or stylus
  • 2× COM ports plus HDMI and VGA connect legacy industrial gear
  • Core i5-6th Gen with 8 GB DDR3 handles HMI and SCADA workloads

Industrial panel PC

The Partaker A11 is a 19 inch all-in-one computer built for industrial environments. It integrates an Intel Core i5 6th Gen processor at 2.0GHz, 8GB of DDR3L memory and a 256GB SSD into a fanless aluminium chassis with an IP65-rated front panel.

Upgrade from older panels

This unit replaces legacy panel PCs that lack modern I/O or cannot withstand wide temperature ranges. The jump is worth it when an application needs dual COM ports, VGA and HDMI output, plus USB 3.0 connectivity in a single compact device that operates from 0 to 50°C.

Embedded mounting and expansion

Installation uses the supplied embedded buckle kits for panel-mount cut-outs of 422 by 346mm, with VESA 75 as an alternative. The fanless design removes filter maintenance, while a full-size Mini PCIe slot with a SIM holder allows wireless upgrades; the single SODIMM slot is already populated to its 8GB maximum.

Přednosti

  • IP65 front panel resists dust and water ingress
  • Fanless aluminium chassis runs silently in noise-sensitive areas
  • 5-wire resistive touchscreen works with gloves or stylus
  • 2× COM ports plus HDMI and VGA connect legacy industrial gear
  • Core i5-6th Gen with 8 GB DDR3 handles HMI and SCADA workloads

Specifikace

ModelA11-PA-190TPC-CE5A(I56)-8G256G
Form FactorAll-in-One
ColorSilver
Operating SystemWindows 10 Pro
CPU TypeIntel Core i5 6th Gen
CPU Name2.00GHz
GPU/VGA TypeIntel Iris Graphics 540
Memory Capacity8GB DDR3
SSD256GB
HDDNo
Screen Size19.0"
TouchscreenYes

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What panel cut-out size does the 19 inch unit need for embedded mounting?

The embedded installation requires an opening hole of 422 x 346 mm to fit the 19 inch industrial panel PC.

How is the panel PC secured during installation, and what step is often missed?

Use the supplied embedded buckle kits to lock the unit into the cut-out; forgetting to tighten all buckles leaves the front panel loose and breaks the IP65 seal.

What storage upgrades are possible later, and what memory type is supported?

One mSATA SSD and one 2.5 inch SATA drive can be added, while the single SODIMM slot accepts DDR3L 1333/1600 memory up to 8 GB.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.