Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Compact 13.3 inch industrial all-in-one panel PC with resistive touchscreen and fanless aluminium chassis

partaker

partaker A3 13.3" All-in-One PC i5-1135G7 32GB DDR4 1TB SSD

SKU CH-H1CK-ZX7BW

13.3" industrial all-in-one with IP65 front panel, resistive touch, fanless aluminium chassis, i5-1135G7, 32GB DDR4 and 1TB SSD

  • Form FactorAll-in-One
  • Operating SystemWindows 11 Pro
  • CPU TypeIntel Core i5 11th Gen
  • GPU/VGA TypeIntel Iris Xe Graphics
  • Memory Capacity32GB DDR4
  • SSD1TB

Memory Capacity 32GB DDR4

  • 16GB DDR4
  • 32GB DDR4
  • 8GB DDR4

SSD 1TB

HDD None

  • 1TB
  • None

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • IP65 front panel resists dust and water ingress in industrial settings
  • Fanless aluminium alloy cooling runs silently for 24/7 operation
  • 5-wire resistive touchscreen rated for 35 million touches
  • Intel Core i5-1135G7 up to 4.20 GHz handles continuous workloads
  • 32 GB DDR4-3200 and 1 TB SSD provide ample memory and storage

Industrial panel PC with resistive touch

The Partaker A3 is a 13.3 inch all-in-one computer built around an Intel Core i5 11th Gen i5-1135G7 processor and 32GB of DDR4 memory. A 1TB SSD provides the primary storage. The 5-wire resistive touchscreen works reliably with gloves or stylus input, and the IP65-rated front panel resists dust and water jets in factory or outdoor kiosk settings.

Fanless aluminium chassis replaces active cooling

Passive cooling eliminates moving parts that fail in vibration-heavy or dusty cabinets, making the upgrade worthwhile when a legacy panel PC suffers fan noise, bearing wear or thermal throttling. The sealed front meets IP65 while the rear I/O retains dual LAN, dual COM, HDMI, VGA and four USB ports for PLCs, barcode scanners and legacy serial gear.

Verify cut-out, voltage and expansion needs

The unit requires a 326 by 232 mm panel cut-out and a 12 V DC supply from the included 100-240 V AC adapter. Confirm that the two M.2 slots — Key E for WIFI6 and Key B for 5G with SIM — match any wireless modules you plan to add, and that the operating temperature range of 0 to 50 °C suits the installation environment.

Přednosti

  • IP65 front panel resists dust and water ingress in industrial settings
  • Fanless aluminium alloy cooling runs silently for 24/7 operation
  • 5-wire resistive touchscreen rated for 35 million touches
  • Intel Core i5-1135G7 up to 4.20 GHz handles continuous workloads
  • 32 GB DDR4-3200 and 1 TB SSD provide ample memory and storage

Specifikace

ModelA3-PA-133TPC-CE5A(I5B)-32G1TBSSD
Form FactorAll-in-One
Operating SystemWindows 11 Pro
CPU TypeIntel Core i5 11th Gen
GPU/VGA TypeIntel Iris Xe Graphics
Memory Capacity32GB DDR4
SSD1TB
HDDNo
Screen Size13.3"
TouchscreenYes

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What cut-out size is needed for the embedded mounting buckle kits on this 13.3" panel PC?

The opening hole measures 326 x 232 mm for flush panel installation using the embedded buckle kits.

Which memory slots and maximum capacity should I use when upgrading the DDR4 RAM later?

Two SODIMM DDR4-3200 slots support up to 64 GB total capacity for future expansion.

What is the minimum rated lifespan of the resistive touchscreen and the LED backlight?

The 5-wire resistive touchscreen is rated for 35 million touches and the backlight for at least 20,000 hours.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.