Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

partaker

partaker A5-PA-150TPC-CE5A(J19)-4G64G 15" all-in-one PC

SKU CH-648X-0CVPS

A 15-inch industrial all-in-one PC with an IP65 front panel, five-wire resistive touchscreen, Intel Celeron J1900 processor, 4GB DDR3 RAM, 64GB SSD and fanless aluminium housing

  • Form FactorAll-in-One
  • ColorSilver
  • Operating SystemWindows 10 Pro
  • CPU TypeCeleron
  • CPU Name2.00GHz
  • GPU/VGA TypeIntel HD Graphics

GPU Intel HD Graphics

Memory 4GB DDR3

  • 4GB DDR3
  • 8GB DDR3

SSD 64GB

  • 64GB
  • 256GB
  • 512GB

HDD None

  • None
  • 1TB

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • IP65 front-panel protection for dust and water resistance
  • Fanless aluminium cooling for silent 0–50 °C operation
  • Five-wire resistive touch rated for 200 million touches
  • Intel Celeron J1900 up to 2.42 GHz with 4 GB DDR3L
  • 64 GB mSATA SSD plus 2.5″ SATA bay for storage expansion

Industrial All-in-One with Resistive Touch

This 15-inch all-in-one panel PC combines an Intel Celeron J1900 processor, 4 GB of DDR3L memory and a 64 GB mSATA SSD in a fanless aluminium chassis. The front panel carries an IP65 rating and a high-temperature five-wire resistive touchscreen suited to gloved or stylus operation. Windows 10 Pro is pre-installed and the unit supports DC 12 V input with a wide-range AC adapter.

Suited for Embedded Automation and Kiosk Roles

The system targets integrators who need a compact, sealed front panel for machine interfaces, self-service terminals or SCADA nodes in 0 – 50 °C environments. Its three COM ports, VGA output and dual audio jacks cover legacy industrial I/O, while the Mini PCIe slot with SIM holder allows optional 4G or Wi-Fi expansion. Buyers who require a capacitive multi-touch screen, active cooling for sustained high loads, or a larger display diagonal should consider other form factors.

Five-Wire Resistive Touchscreen Decides Fit

The defining specification is the 15-inch TFT LED panel with a 1024 x 768 resolution and a five-wire resistive layer rated for 200 million touches. That touch technology works reliably with gloves, wet fingers or styluses but does not support multi-touch gestures. If the application depends on pinch-to-zoom or projected-capacitive responsiveness, this panel will not meet the requirement.

Přednosti

  • IP65 front-panel protection for dust and water resistance
  • Fanless aluminium cooling for silent 0–50 °C operation
  • Five-wire resistive touch rated for 200 million touches
  • Intel Celeron J1900 up to 2.42 GHz with 4 GB DDR3L
  • 64 GB mSATA SSD plus 2.5″ SATA bay for storage expansion

Specifikace

ModelA5-PA-150TPC-CE5A(J19)-4G64G
Form FactorAll-in-One
ColorSilver
Operating SystemWindows 10 Pro
CPU TypeCeleron
CPU Name2.00GHz
GPU/VGA TypeIntel HD Graphics
Memory Capacity4GB DDR3
SSD64GB
HDDNo
Screen Size15"
TouchscreenYes

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How does the 2.42 GHz burst frequency of the Intel Celeron J1900 perform inside this fanless panel PC?

The processor runs at a 2.00 GHz base and can reach 2.42 GHz for short bursts, while the aluminium chassis dissipates heat without fans so sustained loads stay within the 0–50 °C operating range.

What display outputs and data interfaces are capped by the single VGA port and USB 3.0 connection?

The VGA output drives an external monitor up to 1024 x 768, while the lone USB 3.0 port shares bandwidth with three USB 2.0 ports, one Gigabit LAN, three COM ports and audio jacks.

Which mounting pattern and clearances does the 354.3 x 278.3 mm chassis require?

VESA 75 holes on the rear accept standard arms, embedded buckle kits fit a 1024 x 768 cut-out, and the 54 mm depth needs rear clearance for the DC jack, VGA and expansion cables.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.