Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Grey ATX power supply unit with single fan and fixed cables

Replace Power

Replace Power 420 W ATX power supply for HP 900 901 950 951 9760 9795C 97XX

SKU CH-T2VF-5GA9J

A 420 W ATX unit with reduced depth fits HP 900 901 950 951 9760 9795C 97XX desktops and supplies 24-pin, 4-pin, SATA and Molex connectors

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight4
  • Delivers 420 W peak power for demanding workloads
  • Continuous 280 W output sustains stable operation
  • Shallow 5.86" depth fits compact HP chassis
  • Low ripple and noise protect sensitive components
  • 24-pin, 4-pin CPU, three SATA and two Molex connectors included

Replacement PSU for HP Desktops

This 420 W ATX unit is built as a direct replacement for HP 900, 901, 950, 951, 9760, 9795C and 97XX chassis. It fits a standard ATX mounting pattern while using a reduced depth that avoids clearance issues in compact brand-name cases. The grey enclosure holds a single 80 mm fan for airflow. It targets owners of those specific HP models who need a like-for-like swap without case modifications.

280 W continuous output with 420 W peak

The supply delivers a total continuous rating of 280 W and a peak rating of 420 W, providing headroom for brief load spikes. Fixed cables include a 24-pin (20+4) motherboard connector, one 4-pin CPU connector, three SATA 15-pin connectors, two Molex 4-pin connectors and one floppy 4-pin connector. Output rails cover +3.3 V, +5 V, -5 V, +12 V1, +12 V2, -12 V and +5 V standby. Builds that demand more than 280 W sustained will exceed the continuous capacity of this unit.

Low ripple, 80 mm fan cooling

An 80 mm fan handles thermal duties, with the supplier citing low ripple and noise as design goals. AC input accepts 110 V or 220 V at 47–63 Hz, and the unit meets Hi-Pot, ROHS and CE requirements. Rise time is under 70 ms and hold-up time is at least 17 ms at nominal input. The compact 5.86" x 3.3" footprint helps airflow in tight bays, while the fixed cable set keeps routing simple for the supported HP platforms.

Přednosti

  • Delivers 420 W peak power for demanding workloads
  • Continuous 280 W output sustains stable operation
  • Shallow 5.86" depth fits compact HP chassis
  • Low ripple and noise protect sensitive components
  • 24-pin, 4-pin CPU, three SATA and two Molex connectors included

Specifikace

BrandReplace Power
ModelHP 900 CTO 901 CTO 950 CTO 951 CTO 9760 9795C 97XX
ColorGrey
TypeATX
Fans1
Weight4

Otázky k tomuto produktu

Will the 5.86-inch depth fit in my HP 900 or 97XX case alongside the existing motherboard?

The unit is 5.86 inches deep, shorter than a standard ATX supply, so it leaves extra clearance for cables and boards in HP 900, 901, 950, 951, 9760 and 97XX chassis.

How can I verify the 420-watt unit is delivering stable power after installation?

The supply specifies rise time under 70 ms, hold-up time of at least 17 ms at nominal input, and low ripple and noise across the +3.3 V, +5 V, ±12 V and +5 VSB rails.

Which power connectors come attached to the unit for my drives and motherboard?

Fixed cables provide one 24-pin (20+4) ATX connector, one 4-pin CPU connector, three SATA 15-pin plugs, two Molex 4-pin plugs and one floppy 4-pin plug.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.