Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Grey ATX power supply unit with single fan and 20+4 pin connector

Replace Power

Replace Power 420W ATX power supply grey 1 fan 20+4Pin 12V 16A 250W replacement

SKU CH-HF4E-NR7FW

420W ATX replacement PSU with 20+4Pin and +12V connectors for Bestec 250W units

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 420 W output upgrades from 250 W original
  • Single 12 V rail delivers 16 A for stable loads
  • 20+4-pin ATX connector fits existing motherboard
  • 115 / 230 V input works worldwide without switching
  • Grey ATX chassis with one fan keeps system cool

Replacement 420W ATX Power Supply

This 420 watt ATX unit replaces the Bestec ATX-250-12Z C5R 250W and compatible HP models including 440569-001 and HP-D3057F3H. It delivers a free capacity upgrade over the original 250 watt design while using the same 20+4 pin main connector and single +12V rail rated at 16 amps. The grey chassis houses one fan and weighs 0.1 units.

Suits owners of legacy HP desktops needing

Builders restoring or repairing systems that shipped with the listed Bestec or HP part numbers will find the connectors and form factor match without modification. It is not for systems requiring higher 12V current than 16A, multiple 12V rails, or modern CPU and GPU power connectors not present on this unit. Buyers needing greater total wattage or modular cabling should look at other models.

Fits standard ATX bays with 115/230V input

The supply accepts 115 or 230 volt input at 50 or 60 Hz and provides +3.3V at 13A, +5V at 13A, -12V at 0.8A, -5V at 0.5A and +5VSB at 2.5A. Rise time is under 70ms and hold-up time is at least 17ms at nominal voltage. The single 20+4 pin connector feeds the motherboard while the integrated cables serve legacy peripherals, freeing the builder from sourcing obsolete proprietary parts.

Přednosti

  • 420 W output upgrades from 250 W original
  • Single 12 V rail delivers 16 A for stable loads
  • 20+4-pin ATX connector fits existing motherboard
  • 115 / 230 V input works worldwide without switching
  • Grey ATX chassis with one fan keeps system cool

Specifikace

BrandReplace Power
ColorGrey
TypeATX
Fans1
Weight0.1

Otázky k tomuto produktu

Does this 420W unit need a 20+4-pin motherboard connector and a +12V rail rated at 16A to power my system?

Yes, it supplies a 20+4-pin main connector and a single +12V rail delivering 16A, matching the listed output specification.

Will the grey ATX chassis and single fan fit the same mounting points as my old Bestec ATX-250-12Z C5R 250W supply?

The unit follows the ATX form factor and is described as a direct replacement for the Bestec ATX-250-12Z C5R 250W and HP 440569-001 models.

How can I verify the PSU is operating correctly once installed?

Check that the system powers on reliably, voltages on the +3.3V, +5V and +12V rails remain stable under load, and the single fan spins without unusual noise.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.