Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Replace Power

Replace Power ATX power supply 480W for HP 5188-2625 5188-2627 5188-2626 5187-5008

SKU CH-W39T-KFH95

A 480W ATX power supply with one fan replaces HP units 5188-2625, 5188-2626, 5188-2627 and 5187-5008, delivering 420W maximum power with over-voltage, over-power and short-circuit protection

  • TypeATX
  • Fans1
  • Weight1
  • 480 watt output runs your HP system
  • 420 watt maximum power handles full loads
  • Single fan provides quiet cooling
  • Over voltage, over power and short circuit protection guards components
  • Tested at 50 °C ambient for reliable operation

Replace Power 480 W ATX PSU for HP systems

This Replace Power ATX power supply provides 480 watts of rated output and is built as a direct replacement for HP part numbers 5188-2625, 5188-2627, 5188-2626 and 5187-5008. It uses a single fan for cooling and includes over-voltage, over-power and short-circuit protection. The unit is supplied new and has passed 100 % hi-pot, function and burn-in testing at 50 °C ambient temperature.

Suitable for HP Pavilion owners needing

The unit fits the listed HP part numbers and delivers 420 W maximum power on the 12 V rail, so it supports the original system configuration. Builders who need higher wattage, modular cables or a different form factor should look at other options. It is not intended for custom builds that require non-standard pin-outs or additional PCIe connectors.

Continuous-load behaviour with single-fan cooling

Under sustained load the power supply maintains its rated output while the single fan manages thermals within the tested 50 °C environment. Protection circuits engage cleanly if voltage or current exceeds safe limits. The burn-in validation suggests stable operation during extended sessions rather than only short bursts.

Přednosti

  • 480 watt output runs your HP system
  • 420 watt maximum power handles full loads
  • Single fan provides quiet cooling
  • Over voltage, over power and short circuit protection guards components
  • Tested at 50 °C ambient for reliable operation

Specifikace

BrandReplace Power
TypeATX
Fans1
Weight1

Otázky k tomuto produktu

Which HP part numbers must my chassis already support for this 480W ATX unit to fit?

The supply replaces HP part numbers 5188-2625, 5188-2626, 5188-2627 and 5187-5008, so your case must accept one of those.

Will the single fan keep an older motherboard with a 12V rail cool enough under load?

The unit was burn-in tested at 50°C ambient and delivers up to 420W continuous on the 12V rail, so a legacy board should stay within thermal limits.

How can I verify the over-voltage and short-circuit protections are active after installation?

Power the system on; the supply runs its internal self-test at start-up and the fan spins, confirming the protection circuits are functional.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.