Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with six SATA ports and silver heatsink

RIITOP

RIITOP NVT6S M.2 NVMe to 6x SATA 3.0 expansion card

SKU CH-30R8-VEN3J

Adds six SATA 3.0 ports through a single M.2 NVMe slot using an ASM1166 controller with LED status indicators and an aluminum heatsink

  • TypeSATA Expansion Card
  • StandardSATA 3.0
  • Data Transfer Rate6Gbps
  • Add six SATA drives through one M.2 NVMe slot
  • ASM1166 controller delivers 6Gbps per port
  • PCIe 3.0 x2 uplink provides 16Gbps bandwidth
  • Aluminium heatsink keeps controller temperatures low
  • Per-port LEDs show device presence and activity

M.2 NVMe to 6× SATA 3.0 adapter

This card converts a single M-key M.2 NVMe slot into six SATA 3.0 ports running at 6 Gbps each. It is built around the ASMedia ASM1166 controller and includes an aluminium heatsink for thermal stability. Each port has an LED that shows device presence and flashes during data activity. The board is driver-free and works immediately after installation.

Desktop builders adding multiple drives

It suits users who need to connect several SATA SSDs or hard drives through one M.2 slot, such as in a multi-bay storage server or a workstation with limited expansion slots. Soft RAID arrays can be created using the operating system’s built-in tools. The card does not support hot-swap, so drives must be connected before power-on. Builders who require hot-plug capability or more than six ports should look elsewhere.

Six ports sharing a PCIe 3.0 ×2 uplink

The upstream link provides 16 Gbps of total bandwidth, shared across all six downstream ports. Everyday file copies, backups and media streaming run comfortably within this headroom. Sustained simultaneous transfers on all drives will saturate the uplink and limit per-drive throughput. The design targets capacity expansion rather than peak single-drive speed.

Přednosti

  • Add six SATA drives through one M.2 NVMe slot
  • ASM1166 controller delivers 6Gbps per port
  • PCIe 3.0 x2 uplink provides 16Gbps bandwidth
  • Aluminium heatsink keeps controller temperatures low
  • Per-port LEDs show device presence and activity

Specifikace

BrandRIITOP
ModelNVT6S
TypeSATA Expansion Card
StandardSATA 3.0
Data Transfer Rate6Gbps

Otázky k tomuto produktu

What M.2 slot keying does the NVT6S require on the motherboard?

The card fits an M-key M.2 NVMe slot; it will not work in a B-key or B+M-key slot.

Can I connect my existing SATA 3.0 hard drives and SSDs to the six ports?

Yes, each downstream port runs at SATA 3.0 6Gbps and is backward compatible with older SATA devices.

How do the LED indicators show that a drive is active?

The LED stays lit when a drive is detected and flashes during read or write activity on that port.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.