Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular PCIe add-in card with gold edge connector and silver bracket, labeled SanDisk Fusion ioMemory SX350-3200 3.2TB

SanDisk

SanDisk Fusion ioMemory SX350-3200 3.2TB PCIe internal SSD

SKU CH-QG3A-FS0E1 MPN SX350-3200

3.2 TB PCI-Express 2.0 x8 internal SSD with MLC memory delivering 2.80 GB/s sequential read, 2.20 GB/s sequential write and up to 345K/385K random IOPS

  • Device TypeInternal
  • Capacity3.2TB
  • Memory ComponentsMLC
  • InterfacePCI-Express 2.0 x8
  • Max Sequential Read2.80 GBps
  • Max Sequential Write2.20 GBps
  • 2 TB capacity handles massive datasets
  • PCIe 2.0 x8 interface delivers 2.80 GB/s sequential reads
  • MLC memory sustains 2.20 GB/s sequential writes
  • 345K random read IOPS accelerates latency-sensitive workloads
  • 385K random write IOPS maintains throughput under heavy load

Capacity and interface

The SanDisk Fusion ioMemory SX350-3200 is a 3.2TB internal solid-state drive that connects through a PCI-Express 2.0 x8 slot. It uses MLC flash memory and is built as a PCIe application accelerator for read-intensive workloads.

Workload fit

This drive suits web hosting, data mining, seismic data processing, content caching, 3D animation and CAD/CAM tasks where low latency matters more than raw bandwidth. It is not intended for general-purpose consumer storage or boot-drive duties.

Headroom and limits

Sequential reads reach 2.80 GBps and writes 2.20 GBps, with random performance up to 345K read and 385K write IOPS. Latency sits at 79 microseconds read and 15 microseconds write, so the drive handles heavy read queues comfortably but will saturate on sustained write-heavy streams.

Přednosti

  • 2 TB capacity handles massive datasets
  • PCIe 2.0 x8 interface delivers 2.80 GB/s sequential reads
  • MLC memory sustains 2.20 GB/s sequential writes
  • 345K random read IOPS accelerates latency-sensitive workloads
  • 385K random write IOPS maintains throughput under heavy load

Specifikace

BrandSanDisk
SeriesFusion ioMemory
Device TypeInternal
Capacity3.2TB
Memory ComponentsMLC
InterfacePCI-Express 2.0 x8
Max Sequential Read2.80 GBps
Max Sequential Write2.20 GBps
Weight5.20 oz

Otázky k tomuto produktu

Does this card fit in a standard PCIe 3.0 or 4.0 slot?

The card uses a PCI-Express 2.0 x8 interface and will operate in any slot that provides at least eight lanes at Gen 2 speeds or higher.

What read and write latency should I expect for random workloads?

Random read latency is 79 µs and random write latency is 15 µs, with up to 345K read IOPS and 385K write IOPS.

Is any additional software or driver required to use the drive?

The drive relies on SanDisk VSL (virtual storage layer) software for direct memory access and low-latency operation; the appropriate driver package must be installed on the host OS.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.