Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 3.5 inch bare drive with 80 pin SCSI connector

Seagate

Seagate Cheetah 15K.3 ST336753LC 36.7GB 15000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive

SKU CH-6SC3-62XKP MPN ST336753LC

High-speed 36.7 GB 15000 RPM SCSI Ultra320 drive with 8 MB cache and 3.6 ms seek time for demanding server workloads

  • PackagingBare Drive
  • InterfaceSCSI Ultra320 80pin
  • Capacity36.7GB
  • RPM15000 RPM
  • Cache8MB
  • Average Seek Time3.6ms
  • 15,000 RPM spindle for fast data access
  • 6 ms average seek time cuts latency
  • 8 MB cache smooths burst workloads
  • 7 GB capacity in 3.5" form factor
  • SCSI Ultra320 80-pin interface for server integration

Enterprise Storage Drive

The Seagate Cheetah 15K.3 ST336753LC is a 36.7GB 3.5-inch internal hard drive spinning at 15000 RPM with an 8MB cache. It connects via a SCSI Ultra320 80-pin interface and delivers a 3.6ms average seek time. This new bare drive is built for legacy enterprise servers and storage arrays requiring this specific connection standard.

Suited for Legacy SCSI Systems

This drive fits administrators maintaining or repairing older servers that natively support the SCSI Ultra320 80-pin interface and the 1.0-inch low-profile form factor. It is not suitable for systems lacking that specific host interface, nor for users needing larger capacities for modern workloads.

Interface Decides Compatibility

The single specification that determines fit is the SCSI Ultra320 80-pin interface; the drive will only function in a backplane or controller providing that exact connection.

Přednosti

  • 15,000 RPM spindle for fast data access
  • 6 ms average seek time cuts latency
  • 8 MB cache smooths burst workloads
  • 7 GB capacity in 3.5" form factor
  • SCSI Ultra320 80-pin interface for server integration

Specifikace

BrandSeagate
SeriesCheetah 15K.3
ModelST336753LC
PackagingBare Drive
InterfaceSCSI Ultra320 80pin
Capacity36.7GB
RPM15000 RPM
Cache8MB
Average Seek Time3.6ms
Average Write Time4.0ms
Average Latency2ms
Features3D Defense System
The most comprehensive drive protection system in the industry, consisting of Drive Defense, Data Defense and Diagnostic Defense.
SeaShell
Seagate's revolutionary packaging protects the drive from external shock.
SAMS
Seagate's Advanced Multidrive System optimizes the drive for maximum I/O performance in Multidrive environments.
JIT
Just-In-Time minimizes actuator impact on power, vibration and acoustics.
Form Factor3.5"
Přepravní hmotnost0.82 kg
Rozměry balení147 × 102 × 25 mm

Otázky k tomuto produktu

Does this drive need a SCSI Ultra320 host adapter with an 80-pin connector?

Yes, the ST336753LC uses an 80-pin SCSI Ultra320 interface, so the host adapter or backplane must provide that connector and signalling standard.

Will the 1.0-inch low-profile 3.5-inch form factor fit in the same drive bay as a standard-height SCSI drive?

The drive is a 1.0-inch low-profile 3.5-inch unit; it occupies less vertical space than a full-height drive, so it fits in a standard bay but may leave a gap unless a filler bracket is used.

How can I verify the drive is performing at its rated 15000 RPM and 3.6 ms average seek time after installation?

Run the drive vendor's diagnostic utility or a SCSI-aware benchmark; it will report spindle speed, seek latency and cache operation matching the 15000 RPM, 3.6 ms seek and 8 MB buffer specifications.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.