Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 3.5 inch bare hard drive with circuit board visible

Seagate

Seagate ST6000DX000 6TB 7200 RPM 128MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-H5WP-K3PG3 MPN ST6000DX000

A 6TB 3.5" desktop hard drive spinning at 7200 RPM with 128MB cache and a SATA 6.0Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • Cache128MB
  • Average Seek Time<8.5 µs typical
  • 6TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers responsive file access
  • 128MB cache buffers bursts for smoother throughput
  • SATA 6.0Gb/s interface fits standard desktop bays
  • 5-inch form factor suits typical tower and NAS chassis

Desktop storage for bulk data

The ST6000DX000 is a 3.5 inch internal hard drive with a 6TB capacity. It spins at 7200 RPM and provides a 128MB cache for desktop workloads. The SATA 6.0Gb/s interface connects directly to standard motherboard ports. It suits users who need large volumes of affordable storage for media libraries or backups.

Bare drive with standard mounting

The unit ships as a bare drive without a retail box or cables. Dimensions are 5.79 inches long by 4 inches wide by 1.03 inches high, matching the standard 3.5 inch form factor. Four side mounting holes and bottom threads allow installation in any compatible drive bay or tray. The SATA data and power connectors sit on the rear edge for routine cabling.

No accessories or software included

The package contains only the drive itself; no screws, cables or software utilities are supplied. Builders must provide their own SATA data cable and power lead from the power supply. Drive management relies on the operating system's built-in formatting and monitoring tools. Buyers who want installation hardware or cloning software should source those separately.

Přednosti

  • 6TB capacity stores large media libraries and backups
  • 7200 RPM spindle speed delivers responsive file access
  • 128MB cache buffers bursts for smoother throughput
  • SATA 6.0Gb/s interface fits standard desktop bays
  • 5-inch form factor suits typical tower and NAS chassis

Specifikace

BrandSeagate
ModelST6000DX000
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity6TB
RPM7200 RPM
Cache128MB
Average Seek Time<8.5 µs typical
Average Write Time<9.5 µs typical
Average Latency4ms
Form Factor3.5"
Height (maximum)1.03"
Width (maximum)4"
Length (maximum)5.79"
Přepravní hmotnost1.36 kg
Rozměry balení196 × 150 × 74 mm

Otázky k tomuto produktu

What practical throughput does the SATA 6.0Gb/s interface cap at on this drive?

The SATA 6.0Gb/s interface supports up to 6.0Gb/s, though real-world sequential speeds are limited by the 7200 RPM platters and 128MB cache.

What are the exact mounting dimensions for a standard 3.5" bay?

The drive measures 1.03" high, 4" wide and 5.79" long, matching standard 3.5" bay screw-hole spacing.

How do I install this bare drive and which step is often missed?

Mount it in a 3.5" bay, connect a SATA data cable and a SATA power connector, then initialise and format the 6TB volume in your OS — skipping initialisation is the common mistake.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.