Solidigm D5-P5430 15.36TB E1.S 9.5mm PCIe 4.0 enterprise SSD SBFPFUBU153T001
- E1.S 9.5mm
- 15.36TB
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Solidigm
U.2 15 mm enterprise SSD with 30.72 TB of 192-layer QLC 3D NAND, PCIe 4.0 x4, 7000 MB/s read, 3000 MB/s write, 971000 random read IOPS, 86000 random write IOPS.
Option 30.72TB U.2
The Solidigm D5-P5430 is a 30.72 TB enterprise SSD built for read-intensive data-centre workloads. Its U.2 15 mm form factor fits standard 2.5-inch hot-swap bays in servers and storage arrays. The drive uses 192-layer QLC 3D NAND and a PCIe 4.0 x4 interface to deliver high capacity in a single slot. It targets environments that prioritise density and sequential throughput over write endurance.
Sequential reads reach 7000 MBps while sequential writes peak at 3000 MBps, so large ingest and streaming workloads run smoothly. Random read performance hits 971000 IOPS at queue depth 256, giving ample headroom for parallel access patterns. Random writes are rated at 86000 IOPS, and the 0.57 DWPD endurance rating means sustained heavy writing will exhaust the 31.93 PBW budget faster than read-dominated use cases.
The drive requires a U.2 backplane or adapter wired for PCIe 4.0 x4 to achieve rated throughput; a PCIe 3.0 link will halve available bandwidth. Systems limited to PCIe 3.0 or lacking U.2 connectors cannot use this SSD at full performance. Buyers needing higher write endurance or a different physical interface should evaluate alternative models.
| Brand | Solidigm |
|---|---|
| Model | D5-P5430 |
| Part Number | SBFPF2BU307T001 |
| Form Factor | U.2 15mm |
| Capacity | 30.72TB |
| Memory Components | 192L QLC 3D NAND |
| Interface | PCI-Express 4.0 |
| Max Sequential Read | Up to 7000 MBps |
| Max Sequential Write | Up to 3000 MBps |
| 4KB Random Read | 971000 IOPS (4K, QD256) |
| 4KB Random Write | 86000 IOPS (8K, QD256) |
| Endurance | Up to 0.57 DWPD (8K RW) / Up to 31.93 PBW |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 25W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 144.5g |
| Přepravní hmotnost | 0.17 kg |
| Rozměry balení | 140 × 110 × 17 mm |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
The drive uses a U.2 15mm form factor, which is physically taller than standard 7mm 2.5-inch drives; verify your bay or carrier supports 15mm height before installation.
Check the link width and speed in your OS or BIOS — it should report PCIe 4.0 x4; benchmark sequential reads near 7000 MBps and writes near 3000 MBps to validate performance.
The single pack contains only the SSD; any 15mm-compatible drive carrier, heatsink, U.2 cable or PCIe adapter must be purchased separately.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?