Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 80mm PCI slot exhaust fan, 20mm thick, LP4 power connector

STARTECH

STARTECH FANCASE 80mm PCI Slot Cooler 2200 RPM 6.9 CFM 32 dBA Black

SKU CH-JTP1-25T78

An 80 mm PCI-slot exhaust fan delivering 6.9 CFM at 2200 RPM and 32 dBA, powered by an LP4 connector to boost airflow around graphics cards

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypePCI Slot Case Cooler
  • CompatibilityPCI, ISA or AGP Slot
  • Fan Size80mm
  • Fan Thickness20mm

Fan Size 80mm

Model LP4

  • Improves system stability by exhausting hot air from expansion slots
  • Directs 6.9 CFM airflow to video cards at 2200 RPM
  • Quiet 32 dBA operation with brushless ball-bearing motor
  • Compact 110 x 90 x 20 mm design fits PCI, ISA or AGP slots
  • LP4 pass-through connector powers fan without using motherboard headers

PCI slot exhaust cooler

The STARTECH FANCASE mounts in a single PCI, ISA or AGP expansion slot to pull hot air out of the chassis. It targets builders who need extra rear exhaust without using a standard fan mount. Buyers who want a fan with PWM speed control or a motherboard header connection should look elsewhere.

Compact ball-bearing build

The 80 mm by 20 mm frame slides into any free expansion slot and draws power through an LP4 pass-through connector. A brushless DC motor on ball bearings runs at a fixed 2200 RPM while keeping noise to 32 dBA. The black finish matches most internal colour schemes.

Fixed-speed airflow limit

At 6.9 CFM the cooler provides a modest exhaust stream suited to supplemental cooling around a graphics card. It cannot replace a case fan with higher static pressure or variable speed control. The LP4 connector also means the fan runs whenever the power supply is on, regardless of system temperature.

Přednosti

  • Improves system stability by exhausting hot air from expansion slots
  • Directs 6.9 CFM airflow to video cards at 2200 RPM
  • Quiet 32 dBA operation with brushless ball-bearing motor
  • Compact 110 x 90 x 20 mm design fits PCI, ISA or AGP slots
  • LP4 pass-through connector powers fan without using motherboard headers

Specifikace

BrandStarTech.com
ModelFANCASE
Fan Counts1 Fan
Fan ControllerNo Controller
TypePCI Slot Case Cooler
CompatibilityPCI, ISA or AGP Slot
Fan Size80mm
Fan Thickness20mm
Bearing TypeBall
RPM2200 RPM
Air Flow6.9 CFM
Noise Level32 dBA
Power Connector4 Pin
ColorBlack
FeaturesFan utilizes a quiet running brushless DC motor
Power is supplied to the fan using a standard LP4 (hard drive power connector) pass through plug.
Dimensions110 x 90 x 20mm
Package Contents748236
Přepravní hmotnost0.50 kg
Rozměry balení210 × 199 × 30 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What power connector does the 2200 RPM FANCASE use and what does it draw from?

It connects through a standard LP4 pass-through plug, drawing power from a hard-drive style 4-pin supply cable.

What slot type and clearance does the 80 mm FANCASE require?

It mounts in any PCI, ISA or AGP expansion slot and occupies a 20 mm thick profile measuring 110 x 90 mm.

How is the FANCASE installed and which step is often missed?

Insert the bracket into a free expansion slot, secure the retention screw, then attach the LP4 pass-through connector to a power-supply lead — forgetting the power connection leaves the fan idle.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.