Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Compact SFP+ copper transceiver with RJ-45 port, matte metal housing

STARTECH

STARTECH PLUS-T-ST SFP+ Copper Transceiver RJ-45 10 Gbps 30 m

SKU CH-2BVS-KEK1R

Copper SFP+ transceiver with an RJ-45 port for 10 Gbps links up to 30 m

  • Device TypeTransceiver
  • Network MediaCopper
  • PortsRJ-45
  • Max Distance30 m (98.4 ft)
  • Transfer Rate10 Gbps
  • FeatureThe PLUS-T-ST is a Palo Alto Networks PAN-SFP-PLUS-T compati
  • 10 Gbps throughput over copper cabling
  • RJ-45 connector fits existing patch cables
  • 30 m reach covers rack-to-rack links
  • 100/1000/10000Base-TX auto-negotiation
  • Palo Alto Networks PLUS-T compatible module

Palo Alto Compatible SFP+ Copper Module

The PLUS-T-ST is a copper transceiver module programmed for Palo Alto Networks switches and routers. It provides a 10 Gbps RJ-45 connection over standard twisted-pair cabling. Network engineers use it to add copper uplinks without changing existing patch panels. The module arrives new and ready for immediate installation.

Hot-Plug RJ-45 Design for Rack Work

A standard SFP+ form factor allows hot insertion into compatible Palo Alto ports without powering down the chassis. The RJ-45 jack accepts familiar Cat6a or Cat7 patch cords up to 30 m. Copper media avoids the cost and fragility of fibre patch leads in dense racks. Link LEDs on the host port show status instantly after seating the module.

Replaces Fibre Uplinks for Short Runs

This transceiver replaces short-range fibre modules when the link stays within 30 m. It upgrades 1 Gbps copper ports to 10 Gbps without re-cabling if the existing plant meets Cat6a specifications. The jump is worth it when latency and throughput matter more than maximum distance. Buyers needing reaches beyond 30 m or fibre isolation should look elsewhere.

Přednosti

  • 10 Gbps throughput over copper cabling
  • RJ-45 connector fits existing patch cables
  • 30 m reach covers rack-to-rack links
  • 100/1000/10000Base-TX auto-negotiation
  • Palo Alto Networks PLUS-T compatible module

Specifikace

BrandStarTech.com
ModelPLUS-T-ST
Device TypeTransceiver
Network MediaCopper
PortsRJ-45
Max Distance30 m (98.4 ft)
Transfer Rate10 Gbps
FeatureThe PLUS-T-ST is a Palo Alto Networks PAN-SFP-PLUS-T compatible copper transceiver module that has been designed, programmed and tested to work with Palo Alto Networks brand switches and routers. It delivers dependable 10 GbE connectivity over copper cable, for 100/1000/10GBase-T compliant networks, with a maximum distance of up to 30 m (98.4 ft).

Otázky k tomuto produktu

What link speeds does the SFP+ RJ-45 transceiver support over copper?

The module negotiates 100 Mbps, 1 Gbps and 10 Gbps over twisted-pair cabling.

What cable type and maximum length does the 30 m rating require?

Cat6a or better twisted-pair cable up to 30 metres (98.4 ft) for 10 Gbps operation.

How is the transceiver installed in a Palo Alto Networks switch and what step is often missed?

Slide the module into an SFP+ slot until it clicks, then lock the bail latch; the latch must be closed to seat the electrical contacts fully.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.