Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

Systor

Systor 1-to-31 SATA & NVMe Duplicator SYSNVME-NX431

SKU CH-FYD7-KKGNN

Standalone duplicator copies up to 31 SATA or NVMe M.2 drives at 24 GB per minute with NIST 800-88 and DoD 5220.22-M sanitisation

  • Target1 to 31
  • Display20 x 2 LCD
  • Operating TypeStandalone

TARGET SIZE 1 to 31

  • Copy up to 31 targets at 24 GB/min
  • Standalone operation with no PC or software required
  • Supports NVMe and SATA M.2 drives up to 18 TB
  • Three erase modes including NIST 800-88 and DoD 5220.22
  • 20 x 2 LCD shows progress for every job

Standalone duplicator for 31 targets

The Systor SYSNVME-NX431 copies or erases up to 31 SATA and NVMe M.2 drives at once without a host PC. A 20 x 2 LCD and one-touch controls let operators start duplication or sanitisation immediately. It suits IT departments, forensic labs and data centres that need verified clones or certified wipes on mixed media.

Fits a bench with 31 slots and no host

The unit accepts 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 and 22110 form factors, automatically detecting SATA or NVMe signals on each port. Cross-interface copying moves data between NVMe and SATA drives in a single session. No computer, software or extra adapters are required, freeing workstation resources for other tasks.

Runs cool and quiet at 24 GB per minute

Copy speed reaches 24 GB per minute with no degradation as target count rises. Standalone operation keeps acoustic output low and power draw modest compared with PC-based arrays. Secure Erase follows NIST 800-88 and DoD 5220.22-M standards, while Quick Erase and Full Erase give faster turnaround for less sensitive workloads.

Přednosti

  • Copy up to 31 targets at 24 GB/min
  • Standalone operation with no PC or software required
  • Supports NVMe and SATA M.2 drives up to 18 TB
  • Three erase modes including NIST 800-88 and DoD 5220.22
  • 20 x 2 LCD shows progress for every job

Specifikace

Target1 to 31
Display20 x 2 LCD
Operating TypeStandalone

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How many target drives can the SYSNVME-NX431 copy to at once?

The duplicator supports up to 31 target drives simultaneously from a single source.

What is the maximum sustained copy speed and does the unit throttle under load?

Copy speed reaches 24 GB per minute and the manufacturer states there is no speed degradation as target count increases.

Which drive interfaces and form factors must the user already have to use this duplicator?

It accepts M.2 NVMe PCIe and M.2 SATA drives in sizes 2230, 2242, 2260, 2280, 3030, 3042, 3060, 3080 and 22110.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.