Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Standalone SATA and NVMe duplicator unit with five target slots

Systor

Systor 1 to 5 SATA & NVMe Duplicator 24GB/min

SKU CH-DFS0-MHFYC

Standalone duplicator copies or erases one to five SATA and NVMe drives at up to 24 GB per minute

  • Target1 to 5
  • Data Transfer Rate24GB/min
  • Operating TypeStandalone

TARGET SIZE 1 to 05

DATA TRANSFER RATE 24.0GB/min [400MB/sec]

  • Copies up to five drives simultaneously at 24GB/min
  • Erases to NIST 800-88 and DoD 5220.22 standards
  • Handles SATA and NVMe media without a PC
  • Sends source images directly from a computer via USB
  • Logs every duplication session to an SD card

Standalone NVMe & SATA Duplicator

This duplicator clones or erases up to five target drives without a host computer. It accepts M.2 NVMe, M.2 SATA and 2.5-inch SATA media in a single session. The unit is aimed at IT teams, forensic labs and integrators who need repeatable, high-speed duplication across mixed interfaces.

Simple Push-Button Operation

Insert the source and target drives, select the mode and press start; no software installation is required. Cross-interface copying is automatic once the duplicator detects the signal type. Speed will vary with the read and write performance of the individual drives, so identical media yield the most consistent results.

Verify Drive Form Factors Before Ordering

The bays support M.2 lengths up to 2230 and standard 2.5-inch SATA drives; longer M.2 modules or 3.5-inch disks will not fit without adapters. Adapters are also required for mini PCIe or mSATA media. Ensure your source and target drives use MBR or GPT partitioning, which the duplicator handles natively.

Přednosti

  • Copies up to five drives simultaneously at 24GB/min
  • Erases to NIST 800-88 and DoD 5220.22 standards
  • Handles SATA and NVMe media without a PC
  • Sends source images directly from a computer via USB
  • Logs every duplication session to an SD card

Specifikace

Target1 to 5
Data Transfer Rate24GB/min
Operating TypeStandalone

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How can I verify the duplicator completed a copy job correctly after setup?

The log report management tool downloads detailed duplication process information for each port onto an SD card for review.

What comes in the box and which adapters must be purchased separately?

Adapters are needed for mini PCIe and multiple interfaces with SATA socket such as mSATA and CFAST; the unit includes slots for up to five target drives.

Which version should I choose for 18TB drives and NIST 800-88 compliant erasure?

This model supports 18TB+ capacities and offers Secure Erase compliant with NIST 800-88, plus DoD 5220.22-M erase options.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.