Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 140mm PWM case fan with nine LCP blades, 25mm thick, hydraulic bearing Gen.2

Thermaltake

Thermaltake CL-F140-PL14BL-A 140mm case fan 500-2000 RPM 119.6 CFM

SKU CH-HN27-VX1MT MPN CL-F140-PL14BL-A

A 140mm PWM case fan delivering 119.6 CFM airflow at 2000 RPM with a hydraulic bearing for radiator or chassis cooling

  • Fan Counts1 Fan
  • TypeCase Fan
  • Fan Size140mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing Gen.2
  • RPMPWM 500~2000 R.P.M With L.N.C PWM 500~1500 R.P.M
  • 140 mm fan delivers 119.6 CFM airflow for strong case cooling
  • PWM control spans 500 to 2000 RPM for flexible speed management
  • Gen.2 hydraulic bearing runs at 31.6 dB-A for quiet operation
  • Low-noise cable drops speed to 1500 RPM and 24.5 dB-A for silent builds
  • 57 mm-H₂O static pressure suits radiators and restrictive grilles

140 mm PWM case fan for high static pressure cooling

This single 140 mm fan uses a Gen.2 hydraulic bearing and PWM control to spin between 500 and 2000 RPM. It delivers 119.6 CFM of airflow at 31.6 dB-A for demanding chassis or radiator setups. The black, non-LED frame keeps the build clean.

Installation notes and common pitfalls

Mount the 25 mm thick frame with the four standard corner holes and connect the 4-pin PWM header to your motherboard or fan controller. Enabling the Low-Noise Cable limits speed to 1500 RPM, reducing airflow to 87.6 CFM and noise to 24.5 dB-A. Forgetting the LNC or misconfiguring the PWM curve are the typical reasons the fan runs louder than expected.

Compatibility checks before ordering

Verify that your case or radiator accepts 140 mm fans with a 25 mm thickness and that a 4-pin PWM header is available for speed control. The fan is not for builders who need RGB illumination or a multi-pack for populating several mounts at once.

Přednosti

  • 140 mm fan delivers 119.6 CFM airflow for strong case cooling
  • PWM control spans 500 to 2000 RPM for flexible speed management
  • Gen.2 hydraulic bearing runs at 31.6 dB-A for quiet operation
  • Low-noise cable drops speed to 1500 RPM and 24.5 dB-A for silent builds
  • 57 mm-H₂O static pressure suits radiators and restrictive grilles

Specifikace

BrandThermaltake
SeriesTOUGHFAN Pro
ModelToughFan Pro 14 (1 pack)
Part NumberCL-F140-PL14BL-A
Fan Counts1 Fan
TypeCase Fan
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing Gen.2
RPMPWM 500~2000 R.P.M
With L.N.C PWM 500~1500 R.P.M
Air Flow119.6 CFM
With L.N.C 87.6 CFM
Noise Level31.6 dB-A
With L.N.C 24.5 dB-A
Power Connector4 PIN PWM
ColorBlack
LEDNon-LED
Přepravní hmotnost0.38 kg
Rozměry balení210 × 158 × 32 mm

Otázky k tomuto produktu

How can I confirm the fan is running at the correct speed after installation?

Check your BIOS or fan-control software for a PWM reading between 500 and 2000 RPM; with the low-noise cable attached the range will be 500 to 1500 RPM.

What comes in the single-fan package and what must I purchase separately?

The box contains one 140 mm black fan with a 4-pin PWM connector and a low-noise cable; mounting screws are not included.

Which version should I choose if I need maximum airflow for a radiator?

Select this CL-F140-PL14BL-A model; it delivers 119.6 CFM at 31.6 dB-A and 3.57 mm H₂O static pressure, optimised for high-restriction cooling.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.