Thermaltake
Thermaltake WaterRam RGB 16GB DDR4 3200 CL16 CL-W251-CA00SW-A desktop RAM
- 16GB (2 x 8GB)
- DDR4 3200 (PC4 2560…
175,99 US$
0.00226902BTC
Skladem
Thermaltake
Thermaltake WaterRam CL-W252-CA00SW-A 32GB (4×8GB) DDR4 3200 CL16 desktop RAM
32 GB DDR4 kit with integrated liquid-cooling spreaders, 3200 MT/s CL16 timing and addressable RGB sync
- Capacity32GB (4 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL16
- Timing16-18-18-38
- Voltage1.35V
- Buffered/RegisteredUnbuffered
Capacity 32GB (4 x 8GB)
- 16GB (2 x 8GB)
- 32GB (4 x 8GB)
Speed DDR4 3200 (PC4 25600)
- DDR4 3600 (PC4 28800)
- DDR4 3200 (PC4 25600)
Přeškrtnuté varianty existují, ale zde nejsou skladem.
CAS Latency CL16
- CL16
- CL18
Přeškrtnuté varianty existují, ale zde nejsou skladem.
- 32 GB capacity from four 8 GB modules for high multitasking headroom
- DDR4 3200 speed with CL16 latency for responsive system performance
- 35 V operation balances speed with lower power draw
- Built-in liquid-cooling channels plus convection fins keep modules cool under load
- Addressable RGB lighting synchronises with motherboard software for unified effects
WaterRam 32GB DDR4 Kit
Thermaltake WaterRam CL-W252-CA00SW-A is a 32GB kit of four 8GB DDR4 modules rated at 3200 MT/s with CL16 timings. The sticks run at 1.35V and carry RGB lighting that syncs with motherboard software. Intel XMP 2.0 profiles are supported for one-click setup.
Liquid-cooling ready RGB memory
Builders who want integrated liquid-cooling channels on their DIMMs will appreciate the WaterRam design. Users needing standard air-cooled modules or lower-voltage JEDEC-only operation should consider other kits. The RGB sync works with major motherboard ecosystems for unified lighting.
Straightforward DIMM installation
Insert the 288-pin modules into the correct motherboard slots and enable the XMP profile in BIOS to reach 3200 MT/s. Common issues include forgetting to enable XMP, mixing with slower kits, or blocking the liquid fittings with large CPU coolers.
Přednosti
- 32 GB capacity from four 8 GB modules for high multitasking headroom
- DDR4 3200 speed with CL16 latency for responsive system performance
- 35 V operation balances speed with lower power draw
- Built-in liquid-cooling channels plus convection fins keep modules cool under load
- Addressable RGB lighting synchronises with motherboard software for unified effects
Specifikace
| Brand | Thermaltake |
|---|---|
| Series | WaterRam |
| Model | CL-W252-CA00SW-A |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL16 |
| Timing | 16-18-18-38 |
| Voltage | 1.35V |
| Buffered/Registered | Unbuffered |
| Heat Spreader | Yes |
| Features | Crafted For Excellence Liquid Cooling or Heatsinks Convection Two-way, Your Way It's not just Smart, It's Brilliant! Sync with Motherboard RGB Software Intel XMP 2.0 Ready |
| LED Color | RGB |
Další verze tohoto modelu
Dalších 1 v této řadě
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Otázky k tomuto produktu
What motherboard slot does the 288-pin DDR4 WaterRam kit require?
The modules use the standard 288-pin DDR4 DIMM slot, so a motherboard with four DDR4 slots is needed to install all four 8 GB sticks.
Can the 1.35 V DDR4 3200 CL16 modules run with older DDR4 DIMMs at lower speeds?
Yes, the kit will downclock to match the slowest installed DDR4 memory, though mixing timings and voltages may require manual BIOS adjustment for stability.
How do I confirm the kit is running at DDR4 3200 with 16-18-18-38 timings after enabling Intel XMP 2.0?
Check the memory tab in CPU-Z or the BIOS memory information screen; it should show 3200 MT/s and the 16-18-18-38 timing row when XMP 2.0 is active.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277185BTC
Skladem
