Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four white DDR4 memory sticks with RGB light bars

Timetec

Timetec Pinnacle Konduit RGB 32GB (4x8GB) DDR4 3200 White

SKU CH-05XA-WWBY4

A 32 GB DDR4 kit of four white 8 GB modules with RGB lighting running at 3200 MHz CL16 and 1.35 V

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ColorWhite

Capacity 32GB (4 x 8GB)

  • 32GB quad-channel capacity for high multitasking headroom
  • DDR4 3200 speed with CL16-18-18-38 tested latency
  • 8 RGB zones per module sync with major motherboard software
  • XMP 2.0 one-click profile reaches rated 3200MHz
  • White aluminum heat spreader aids cooling in light-themed builds

32 GB DDR4 kit for gaming builds

The Timetec Pinnacle Konduit RGB kit delivers 32 GB of DDR4 memory across four 8 GB modules. It is built for desktop enthusiasts who want a white aesthetic and addressable lighting. XMP 2.0 support allows the rated speed to be set with a single BIOS change. The modules are tested for compatibility with major motherboard QVL lists.

Aluminium spreader and 1.35 V operation

Each module uses a white aluminium heat spreader with eight RGB zones per stick. Lighting synchronises with ASUS Aura, Gigabyte RGB Fusion, MSI Mystic Light and ASRock Polychrome Sync software. The kit runs at 1.35 V, keeping power draw modest during typical desktop workloads. No additional cooling is required for standard operation.

Stable CL16 timings at 3200 MHz under load

With XMP enabled, the memory operates at 3200 MHz with primary timings of 16-18-18-38. The single-rank 1Rx8 ICs maintain these latencies during sustained sessions without throttling. If XMP is not activated, the modules fall back to a 2400 MHz default frequency. The design targets consistent throughput for extended gaming or rendering tasks.

Přednosti

  • 32GB quad-channel capacity for high multitasking headroom
  • DDR4 3200 speed with CL16-18-18-38 tested latency
  • 8 RGB zones per module sync with major motherboard software
  • XMP 2.0 one-click profile reaches rated 3200MHz
  • White aluminum heat spreader aids cooling in light-themed builds

Specifikace

Capacity32GB (4 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ColorWhite

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the four 288-pin DDR4 modules and enable the 3200MHz speed?

Insert each module into the motherboard slots until the retention clips click, then enter the BIOS and enable the XMP 2.0 profile so the kit runs at 3200MHz instead of the 2400MHz default.

What maintenance will the RGB lighting and heat spreaders need over time?

Use compressed air to clear dust from the white aluminum heat spreaders and the 8 LED zones per module; no liquid cleaners or disassembly are required.

What is the first limit reached during sustained heavy workloads?

The CAS latency of CL16-18-18-38 at 1.35V sets the timing boundary before thermal throttling becomes a factor on these single-rank 1Rx8 ICs.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.