Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight black DDR5 RDIMM modules with copper micro-heatsinks on RCD and PMIC components

V-color

V-color WRX90 OC R-DIMM 128GB (16GBx8) DDR5 7000MHz CL34 1.4V ECC Registered

SKU CH-VZT8-K0K9F

Eight-module DDR5 registered ECC kit delivering 128 GB at 7000 MHz CL34 with micro-heatsinks for WRX90 workstations

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 7000 (PC5 56000)
  • CAS LatencyCL34
  • Timing34-42-42-102
  • Voltage1.4V

Capacity 128GB (8 x 16GB)

Speed DDR5 7000 (PC5 56000)

  • 128 GB capacity across eight 16 GB modules for large workloads
  • DDR5 7000 MHz speed with CL34 latency for fast response
  • ECC registered design protects data integrity under heavy load
  • AMD EXPO profile enables one-click overclocking on WRX90 platforms
  • Patented RCD and PMIC micro-heatsinks lower temperatures by 30-40%

Built for WRX90 workstations

This 128 GB kit delivers eight 16 GB DDR5 registered DIMMs tuned to 7000 MHz with CL34 latency. It targets Threadripper PRO 7000 series systems that require ECC integrity at overclocked speeds. The AMD EXPO profile activates the rated frequency without manual tuning. Builders who need more capacity or non-registered modules should look elsewhere.

Registered design with micro-heatsinks

Each module uses a 288-pin RDIMM layout and 1Rx8 Hynix ICs on a 10-layer PCB. Patented copper-alloy micro-heatsinks cover the RCD and PMIC, lowering their temperature by 30 to 40 percent versus bare sticks. The 1.4 V operating voltage supports sustained high-frequency operation. Systems without WRX90 chipset support cannot use this memory.

EXPO profile and validated ICs

The bundled AMD EXPO profile sets 7000 MHz, CL34-42-42-102 timings and 1.4 V automatically in compatible BIOSes. Factory auditing and automated sorting of every Hynix die aim to reduce early-life failures. No extra software utilities or RGB control applications are included. Users who prefer manual voltage scaling or lower-voltage JEDEC profiles will not find those options pre-configured.

Přednosti

  • 128 GB capacity across eight 16 GB modules for large workloads
  • DDR5 7000 MHz speed with CL34 latency for fast response
  • ECC registered design protects data integrity under heavy load
  • AMD EXPO profile enables one-click overclocking on WRX90 platforms
  • Patented RCD and PMIC micro-heatsinks lower temperatures by 30-40%

Specifikace

BrandV-Color
SeriesWRX90 OC R-DIMM
ModelTRA516G70S834O
Part NumberTRA516G70S834O
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 7000 (PC5 56000)
CAS LatencyCL34
Timing34-42-42-102
Voltage1.4V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
BIOS/Performance ProfileAMD EXPO
ChipsetSK Hynix IC
Heat SpreaderYes
Compatible SystemAMD Threadripper - WRX90 Workstation Motherboards
FeaturesEquipped with patented exclusive RCD and PMIC Micro-Heatsink for improved cooling efficiency.

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What DDR5 speed and peak transfer rate does the EXPO profile on these 128GB R-DIMMs target?

The kit runs at 7000MHz with a PC5-56000 rating when the AMD EXPO profile is enabled.

What physical clearance and slot count do the 288-pin modules with the RCD and PMIC micro-heatsinks require?

Eight 288-pin DDR5 RDIMM slots are needed; the copper-alloy micro-heatsinks on the RCD and PMIC add height, so verify CPU-cooler clearance.

How do I install the eight 16GB sticks so the WRX90 motherboard recognises the full 128GB at 7000MHz CL34?

Populate all eight channels in the order the board manual specifies, enable the AMD EXPO profile in BIOS, and confirm 1.4V is applied; skipping the EXPO step leaves the kit at JEDEC defaults.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.