Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black standalone SATA duplicator with five drive trays and blue LCD display

VinPower

VinPower HDDShark-5T-BK 1-to-5 SATA Hard Drive Duplicator

SKU CH-JDD4-VEQVC MPN HDDShark-5T-BK

Standalone SATA duplicator copies one drive to five targets at 75 MB/s with 128 MB buffer and dedicated cooling fan

  • TypeHard Drive Duplicator
  • Target1 to 5
  • Buffer Memory128M
  • Display20 x 2 Blue LCD
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 5

  • Standalone operation copies drives without a PC
  • 1-to-5 target bays duplicate one source to five drives simultaneously
  • 128 MB buffer memory sustains up to 75 MB/s transfer rates
  • Dedicated cooling fan and aluminium heat grooves prevent overheating during long runs
  • Blue 20 x 2 LCD shows progress and status at a glance

Target configuration

The VinPower HDDShark-5T-BK is a standalone SATA hard drive duplicator that copies one source drive to up to five target drives simultaneously. It is built for IT departments, data-recovery labs and archivists who need to create multiple clones without tying up a host computer.

Sustained operation

A dedicated cooling fan and an aluminium chassis with heat-conductive grooves keep temperatures stable during long duplication runs. The 128M buffer memory helps maintain a steady throughput up to 75MB/sec across all ports, reducing the chance of bottlenecks when all five targets are active.

Deciding specification

The unit supports SATA interfaces at 1.5Gbps, 3.0Gbps and 6.0Gbps, so it works with virtually any 2.5-inch or 3.5-inch SATA HDD or SSD. Drives that use a different interface cannot be duplicated with this device.

Přednosti

  • Standalone operation copies drives without a PC
  • 1-to-5 target bays duplicate one source to five drives simultaneously
  • 128 MB buffer memory sustains up to 75 MB/s transfer rates
  • Dedicated cooling fan and aluminium heat grooves prevent overheating during long runs
  • Blue 20 x 2 LCD shows progress and status at a glance

Specifikace

BrandVINPOWER
ModelHDDShark-5T-BK
TypeHard Drive Duplicator
Target1 to 5
Buffer Memory128M
Display20 x 2 Blue LCD
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Dimensions (H x W x D)12.00" x 7.50" x 13.50"
Load TypeTray
FeaturesAluminum design with heat conductive grooves
Optional CF Support with optional CF Interface Module Add-on
Dedicated HDD Cooling Fan to prevent overheating
Support of all SATA Interface, 1.5Gbps, 3.0Gbps, 6.0Gbps
Industry Standard 75MB/s (4GB/min) Simultaneous Actual Transfer Speed
Screw-Free Hot Swappable HDD Caddy Tray
Safety HDD Tray Lock to prevent accidental HDD removal during operation
Additional LED for HDD Power and HDD Activity, Fan Activity
Power Control of individual HDD for complete HDD spin-down prior removal
2.50" and 3.50" HDD / SSD Support
Power SupplyInput : 90 - 240 V, Up to 500 Watts max
Přepravní hmotnost7.71 kg
Rozměry balení432 × 432 × 305 mm

Další verze tohoto modelu

Dalších 2 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How loud and hot does the HDDShark-5T-BK get when running all day with five drives?

A dedicated HDD cooling fan and aluminium chassis with heat-conductive grooves keep the five bays cool during extended copy sessions.

What drives or caddies must I already own to use the HDDShark-5T-BK?

The duplicator accepts bare SATA hard drives or SSDs; no caddies are required and the trays load directly.

Will the HDDShark-5T-BK copy older 1.5 Gbps SATA drives alongside newer 6.0 Gbps models?

Yes, it supports all SATA interfaces at 1.5 Gbps, 3.0 Gbps and 6.0 Gbps so mixed-generation drives clone together.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.