Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
3.5 inch bare internal hard drive with silver metal casing and exposed circuit board

Western Digital

Western Digital WD VelociRaptor WD4500HLHX 450GB 10000 RPM 32MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-A8A1-MKQQV MPN WD4500HLHX

A 450 GB, 10,000 RPM SATA hard drive with 32 MB cache built for server workloads

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity450GB
  • RPM10000 RPM
  • Cache32MB
  • FeaturesKiller speed – SATA 6 Gb/s interface and 32 MB cache enhance
  • 10000 RPM spindle speeds up data access
  • 32 MB cache buffers bursts for smoother throughput
  • SATA 6.0 Gb/s interface matches modern controller bandwidth
  • 450 GB capacity fits OS, apps and active projects
  • 4 million hour MTBF rating signals enterprise-grade reliability

WD VelociRaptor 450GB 10000 RPM SATA Drive

The WD VelociRaptor WD4500HLHX is a 450GB 3.5-inch internal hard drive spinning at 10000 RPM with a 32MB cache and SATA 6.0Gb/s interface. It targets server environments and high-performance desktop workloads that demand fast mechanical storage. The bare-drive packaging suits system integrators and builders who install drives directly into chassis or backplanes.

IcePack Frame 2.5-Inch Drive in 3.5-Inch Carrier

The 2.5-inch mechanism sits inside an IcePack mounting frame that provides a backplane-ready 3.5-inch form factor for hot-swap bays and standard drive cages. The frame acts as a heatsink, helping the drive consume less idle power while maintaining similar active power to the previous generation. Enterprise-class construction targets 1.4 million hours MTBF for high duty-cycle reliability.

15 Percent Speed Gain Over Prior Generation

The SATA 6.0Gb/s interface combined with 32MB cache delivers up to 15 percent higher performance than the award-winning previous generation VelociRaptor. Capacities across the series reach 600GB, doubling the prior maximum. No cables, brackets or software utilities are included with the bare drive.

Přednosti

  • 10000 RPM spindle speeds up data access
  • 32 MB cache buffers bursts for smoother throughput
  • SATA 6.0 Gb/s interface matches modern controller bandwidth
  • 450 GB capacity fits OS, apps and active projects
  • 4 million hour MTBF rating signals enterprise-grade reliability

Specifikace

BrandWestern Digital
SeriesWD VelociRaptor
ModelWD4500HLHX
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity450GB
RPM10000 RPM
Cache32MB
FeaturesKiller speed – SATA 6 Gb/s interface and 32 MB cache enhance the next generation 10,000 RPM WD VelociRaptor making it up to 15% faster than the award-winning previous generation.
Monstrous capacity – WD VelociRaptor SATA drives are available in capacities up to 600 GB, double the capacity of the previous generation.
Rock-solid reliability – Designed and manufactured to mission-critical enterprise-class standards to provide enterprise reliability in high duty cycle environments. With 1.4 million hours MTBF, these drives have the highest available reliability rating on a high capacity
UsageIdeal for Servers
Form Factor3.5"
Přepravní hmotnost0.52 kg
Rozměry balení152 × 102 × 32 mm

Otázky k tomuto produktu

What does the SATA 6.0Gb/s interface cap in practice?

The SATA 6.0Gb/s interface caps the maximum theoretical transfer rate at 6.0 Gb/s. Actual sustained throughput depends on the 10000 RPM platters and 32MB cache, but the interface itself will not exceed that ceiling.

What physical space does the 3.5" IcePack mounting frame require?

The drive uses a 2.5-inch mechanism inside a 3.5-inch IcePack frame, so it fits a standard 3.5-inch drive bay and uses standard SATA data and power connectors.

How is the bare drive installed, and what step is often missed?

Mount the 3.5-inch frame in the bay, connect SATA data and power cables, then initialise and format the 450GB volume in the OS. The step often missed is initialising the disk before formatting.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.