Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 4U rackmount server case with five 3.5 hot-swap bays and three 5.25 bays

WUQ

WUQ RM41-H08 4U rack server 5×3.5 hot-swap 3×5.25 bays USB 3.1 Gen1

SKU CH-BBF7-KHWZ0

A 4U rack server chassis holding five hot-swap 3.5-inch SAS/SATA drives and three 5.25-inch bays with front USB 3.1 Gen1 ports

  • TypeServers
  • Five 3.5" SAS/SATA drives hot-swappable with tray-free screw-less design
  • Anti-theft lock on each drive tray secures confidential data
  • SSI-CEB motherboard support fits standard server boards
  • Seven full-size PCI/PCIe expansion slots for add-in cards
  • Three 5.25" bays plus front USB 3.1 Gen1 ports for flexible media access

Server chassis for dense 3.5 storage

The WUQ RM41-H08 is a 4U rack-mount server system built to hold up to five hot-swappable 3.5-inch drives. Trays use a screw-less design and include an anti-theft lock for physical security. Front-panel I/O provides 5 Gbps USB 3.1 Gen 1 ports. The enclosure accepts SSI-CEB motherboards and seven full-size expansion slots.

Suits builders needing maximum 3.5 density

This chassis targets integrators who require five front-accessible drive bays with 12 Gbit/s SAS and SATA support in a 4U footprint. It is not suitable for deployments that need 2.5-inch drive carriers, tool-less 5.25 device mounting beyond the three standard bays, or front-panel connectivity faster than 5 Gbps USB.

Five hot-swap 3.5 bays at 12 Gbit/s

The defining specification is the five tray-free 3.5-inch bays rated for 12 Gbit/s SAS and SATA with hot-swap capability. If your storage plan relies on a different drive count, form factor or interface speed, this enclosure will not match the requirement.

Přednosti

  • Five 3.5" SAS/SATA drives hot-swappable with tray-free screw-less design
  • Anti-theft lock on each drive tray secures confidential data
  • SSI-CEB motherboard support fits standard server boards
  • Seven full-size PCI/PCIe expansion slots for add-in cards
  • Three 5.25" bays plus front USB 3.1 Gen1 ports for flexible media access

Specifikace

TypeServers

Otázky k tomuto produktu

Should I fill all five 3.5-inch hot-swap bays with 12 Gbit/s SAS drives or mix in SATA drives?

The five trays accept 12 Gbit/s SAS or SATA drives in any combination; choose SAS for higher throughput or SATA for lower cost per terabyte.

What does the 12 Gbit/s figure mean once the drives are installed in the server?

It is the maximum interface speed per drive; actual throughput depends on the drive, controller and workload.

Does the front USB 3.1 Gen1 port run at 5 Gbps or is it limited by the chassis?

The front port delivers up to 5 Gbps and is backward compatible with USB 2.0 and 1.1 devices.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.