Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

ZOTAC

ZOTAC GeForce RTX 2060 6GB GDDR6 graphics card ZT-T20600K-10M

SKU CH-VK8N-VVTH3 MPN ZT-T20600K-10M

Refurbished GeForce RTX 2060 with 6GB GDDR6 memory, 1920 CUDA cores and a 1680 MHz boost clock in an 8.3-inch dual-fan design

  • InterfacePCI Express 3.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 20 Series
  • GPUGeForce RTX 2060
  • Boost Clock1680 MHz
  • CUDA Cores1920
  • Real-time ray tracing and DLSS boost frame rates via Turing architecture
  • 6GB 192-bit GDDR6 memory delivers 14.0 Gbps bandwidth for 1080p gaming
  • Super compact 8.3-inch dual-slot design fits 99% of systems
  • Four-display support with 3 x DisplayPort 1.4 and 1 x HDMI 2.0b
  • IceStorm 2.0 dual-fan cooling with metal backplate keeps thermals in check

Compact RTX 2060 for 1080p builds

The ZOTAC GeForce RTX 2060 6GB GDDR6 is a dual-slot graphics card measuring 8.3 inches long. It uses the NVIDIA Turing architecture with 1920 CUDA cores and a 1680 MHz boost clock. The 6GB frame buffer runs on a 192-bit bus at 14.0 Gbps. A single 8-pin connector powers the 160W board.

Fits small cases, avoids multi-GPU setups

The short length suits compact chassis where full-size cards cannot fit. Four display outputs — three DisplayPort 1.4 and one HDMI 2.0b — drive up to four monitors at 4K 60Hz or 7680x4320 at 60Hz. SLI is not supported, so buyers wanting multi-GPU scaling should choose a different model.

6GB GDDR6 on a 192-bit bus decides 1440p headroom

The 6GB capacity and 192-bit interface set the practical ceiling for texture-heavy workloads at 1440p. If your titles or creative apps regularly exceed 6GB VRAM, a card with more memory is required. For 1080p high-refresh gaming and entry-level ray tracing with DLSS, this specification balances cost and performance.

Přednosti

  • Real-time ray tracing and DLSS boost frame rates via Turing architecture
  • 6GB 192-bit GDDR6 memory delivers 14.0 Gbps bandwidth for 1080p gaming
  • Super compact 8.3-inch dual-slot design fits 99% of systems
  • Four-display support with 3 x DisplayPort 1.4 and 1 x HDMI 2.0b
  • IceStorm 2.0 dual-fan cooling with metal backplate keeps thermals in check

Specifikace

BrandZOTAC
ModelZT-T20600K-10M
InterfacePCI Express 3.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 20 Series
GPUGeForce RTX 2060
Boost Clock1680 MHz
CUDA Cores1920
Effective Memory Clock14.0 Gbps
Memory Size6GB
Memory Interface192-Bit
Memory TypeGDDR6
DirectXDirectX 12
OpenGLOpenGL 4.5
Multi-Monitor Support4
HDMI1 x HDMI 2.0b
DisplayPort3 x DisplayPort 1.4
ColorBlack
Max ResolutionDisplayPort 1.4: up to 7680x4320@60Hz
HDMI 2.0: up to 3840x2160@60Hz
SLI SupportNo
Virtual Reality ReadyYes
CoolerDouble Fans
Operating Systems SupportedWindows 10 / 7 x64 ‍👉Check gaming pc with Windows 11 Pro
Thermal Design Power160W
System RequirementsRecommended Power Supply: 500W
Recommended PSU Wattage500W
Power Connector8-Pin
HDCP ReadyYes
FeaturesNew Turing Architecture, Real-time raytracing, DLSS with deep learning AI
6GB 192-bit GDDR6
Dual slot, Super Compact 8.3-inch Card, Fits 99% of Systems
4K / HDR / VR Ready - 3 x DisplayPort 1.4, 1 x HDMI 2.0b
IceStorm 2.0 Cooling, Dual Fan 90mm/100mm, Metal Backplate
Boost Clock 1680 MHz
Max GPU Length211 mm
Card Dimensions (L x H)8.31" x 4.92"
Slot Width2 Slots
Přepravní hmotnost1.40 kg
Rozměry balení283 × 218 × 83 mm

Otázky k tomuto produktu

How much case length does the 8.3-inch card need?

The super compact design measures 8.3 inches and fits 99% of systems, so most standard ATX and micro-ATX cases have enough clearance for the dual-slot bracket.

Which power connector must be attached during installation?

An 8-pin PCIe power connector is required; the card draws 160 W and the manufacturer recommends a 500 W power supply.

How should the IceStorm 2.0 dual-fan cooler be maintained?

Remove dust from the 90 mm and 100 mm fans and the metal backplate every few months with compressed air to keep airflow steady.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.