Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two black 200mm metal axial case fans with 4-pin connectors

Zyvpee

Zyvpee DYTA2070B8S 200x70mm 48V 5.16A 4-pin ball bearing axial case fan (2 pcs)

SKU CH-K7N2-NW1VG

Two 48 V 200 mm ball-bearing axial fans with 4-pin power connectors, supplied as a pair for UPS or case cooling

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size200mm
  • Bearing Type2 Ball
  • Power Connector4 Pin
  • ColorBlack
  • Dual fans included for redundant airflow in critical systems
  • 48 V DC input matches industrial and UPS power rails
  • 16 A current rating supports high-static-pressure cooling
  • Dual ball bearings extend service life in continuous operation
  • 200 mm by 70 mm frame fits standard 20 cm fan mounts

Dual 200 mm axial fans for 48 V DC systems

Two Zyvpee DYTA2070B8S units arrive in a single box. Each fan measures 200 by 70 mm and uses a 4-pin connector with ball-bearing construction. The metal frame houses a DC axial rotor rated for 48 V at 5.16 A. Non-LED black finish keeps the appearance neutral inside server or UPS enclosures.

Replaces worn 48 V 200 mm blowers in UPS

Swap these in when original 200 mm fans develop bearing noise or fail to spin at full voltage. The 4-pin interface supports PWM control where the host provides it. The jump is worth it if the existing units are 2-ball bearing models of identical voltage and current draw; different pin-outs or lower voltage rails will not work.

Straightforward 4-pin swap

Align the 200 mm screw pattern, connect the 4-pin header and verify polarity before powering the rail. Common issues include reversed PWM sense wires on proprietary headers and insufficient clearance for the 70 mm depth in tight chassis. Confirm the host supplies 48 V DC at 5.16 A per fan to avoid under-speed operation.

Přednosti

  • Dual fans included for redundant airflow in critical systems
  • 48 V DC input matches industrial and UPS power rails
  • 16 A current rating supports high-static-pressure cooling
  • Dual ball bearings extend service life in continuous operation
  • 200 mm by 70 mm frame fits standard 20 cm fan mounts

Specifikace

SeriesDYTA2070B8S
ModelDYTA2070B8S
TypeCase Fan
CompatibilityCase
Fan Size200mm
Bearing Type2 Ball
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions200*70mm

Otázky k tomuto produktu

What clearance does the 200mm by 70mm frame need for mounting?

The fan measures 200mm square and 70mm thick, so allow at least that much space inside the chassis plus room for the 4-pin connector.

How do I connect the 4-pin power lead correctly?

Align the keyed 4-pin plug with the motherboard or controller header and press straight in; forcing it backwards bends pins and prevents PWM control.

When should the ball-bearing units be swapped out?

Replace the pair when bearing noise becomes audible or rotational speed falls below the rated 5.16A draw at 48V.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.