Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Square black 50×10 mm 12 V 4-pin case fan with maglev bearing

Zyvpee

Zyvpee MF50101V1-Q020-S99 50×10 mm 12 V 1.44 W 4-pin case fan

SKU CH-DPCT-PVRC0

50×10 mm maglev case fan spins under 1600 RPM for 15-20 CFM airflow with 4-pin PWM control

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Air Flow15-20 CFM
  • Power Connector4 Pin
  • Maglev bearing reduces friction for quieter operation
  • 12 V 4-pin PWM control enables precise speed adjustment
  • 50 × 10 mm frame fits compact CPU coolers
  • 15-20 CFM airflow at under 1600 RPM
  • 44 W power draw keeps energy use low

Zyvpee MF50101V1-Q020-S99 50 mm Fan

The Zyvpee MF50101V1-Q020-S99 is a 50 mm by 10 mm case fan designed for CPU cooler compatibility. It operates on 12 V power with a 1.44 W draw and uses a four-pin connector for speed control. The maglev bearing and non-LED black frame suit compact cooling tasks.

Upgrade From Smaller or Sleeve-Bearing Fans

This fan replaces units that lack a four-pin PWM connector or use louder sleeve bearings at similar dimensions. The jump is worth it when a build needs variable speed control under 1600 RPM and 15 to 20 CFM airflow in a tight 50 mm mounting space.

Fits 50 mm Mounts With Four-Pin Headers

The square 50 by 10 mm frame aligns with standard CPU cooler mounts that accept 5010 form factors. It requires a motherboard or controller with a four-pin header to enable PWM regulation. The maglev bearing reduces friction, freeing the rotor for consistent low-speed operation.

Přednosti

  • Maglev bearing reduces friction for quieter operation
  • 12 V 4-pin PWM control enables precise speed adjustment
  • 50 × 10 mm frame fits compact CPU coolers
  • 15-20 CFM airflow at under 1600 RPM
  • 44 W power draw keeps energy use low

Specifikace

BrandZyvpee
SeriesMF50101V1-Q020-S99
ModelMF50101V1-Q020-S99
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Air Flow15-20 CFM
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions50*10MM

Otázky k tomuto produktu

Will the 50 mm square frame and 10 mm thickness fit my CPU cooler mounting holes?

The fan measures 50 mm by 50 mm and is 10 mm thick, matching the standard 5010 footprint used on many compact CPU coolers.

How do I connect the 4-pin PWM connector so the motherboard controls speed correctly?

Plug the 4-pin header into a CPU fan or system fan socket; the fourth wire carries the PWM signal so the board can regulate RPM up to 1600.

Does the maglev bearing need lubrication or replacement after a period of use?

The magnetic levitation design eliminates physical contact, so no oiling is required and the bearing is rated for long-term operation without service.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.